Dual P3-933 133mhz SECC2 Mobo?

[Guest]

I have 2 P3-933mhz/133mhz/SECC2 with active heat sinks - I'm looking for a good dual-processor motherboard to install them both in to. The system will be used for both Win2k Server, and Win98. The fewer options on the motherboard the better...I have Video, Sound, and LAN cards already.

Thanks in advance for any advice on a motherboard to buy.
-j

 

[Renegade87]

Well johnsb66,

If you aren't afraid to spend $350 and have or want to get RDRAM, the Supermicro PIIIDRE is just the ticket.

Otherwise, look into the Tyan Tiger 133(S1834).
You can read a review of this mobo here:

http://www.2cpu.com/Hardware/tiger133/tiger133.html

Good luck.

"This was no boating accident"

 

[Guest]

will the tiger 133 go as high as 933 mhz?

ignore everything i say

 

[Renegade87]

Antivirus,

Apparently I forgot that the Tyan Tiger 133 is somewhat limited in the range of processors you can use with it, and isn't exactly an overclockers dream. The specs say only up to an 800MHz cpu, and Tyan doesn't support or encourage the use of slotket adapters, and there are no settings to
adjust the FSB or voltage.

"This was no boating accident"