Chaintech 6BTM & PIII 533

[Guest]

I know i'm living in the past, but I'm trying to upgrade my PII 350 to PIII 533!!! I have a Chaintech 6BTM motherboard.
I also run a SCSI harddrive, which is the problem. When I up the clock to 133, the machine starts, but will not boot 98 from the SCSI drive. At 112 clock all is OK. Any ideas????

Thanks
Wayne

 

[Crashman]

YOu have to make sure the 1/4 PCI divider is used at 133 instead of the 1/3. In other words, 1/4 of 133 is 33, 1/3 of 100 is 33.

YOu may have a different problem causing your system to lock at that point which may be unrelated to the SCSI controller. You may need additional voltage or better memory to achieve a 133 FSB.

Video killed my Radio Card!