Sign in with
Sign up | Sign in

KG7 BIOS settings for DDR memory

Last response: in Motherboards
Share
Anonymous
Motherboard Authority
Memory Expert

Ok,
Starting with the assumption that the default BIOS settings are very conservative...

If I only knew squat about the 10 Zillion BIOS settings for the ram of this MoBo (Abit KG7-Raid) I'll bet I could see those benchmarks creep upward.

Anyone know a good site for suggestions/explanations of setting-up/optimizing these CMOS memory parameters?

ABit tried in the manual, but their explanations are little more than repeating the same name I read on the set-up screen.. Thanks ABit!

right heregoes iv'e been tweaking mine for 2 weeks now & this is what iv'e got sofar

advanced chipset features :D isable except for
agp aperture size : 128
agp isa aliasing : enable
agp sec lat timer : 20h
agp fast write : enable (if your card will take it)
agp data rate : *4 (if your card will take it)
agp always comp : enable
super bypass : enable
cas latency : 2 cycle (if your ram will take it)
timing setting : turbo (if your ram will take it)

chipset driving control : set to manual then change these settings only
slew rate control : 7
driving slew rate rise : fastest
driving slew rate fall : fastest
ma n driver strength : 3
cmd n drive strength : 3
clk n drive strength : 3

integrated peripherals : as needed except
init display first : agp
disable any ports you dont use

thats about all iv'e found so far but im still trying

obviously they depend on your gaphics card /ram make /cpu ect
iv'e got my fsb @ 138
1400 cpu @ 11.5*
elsa 920 @235/540
512 crucial 2100 @ as above
Anonymous
Motherboard Authority
Memory Expert

You are the BEST... Thank You!

I'll try some of this now...

btw: I am running a GeForce2 GTS and 256MB Micron unbuffered PC2100
Ask the community
!