G
Guest
Guest
I just bought 3 256MB memory modules to upgrade my Abit BE6.
The modules are generic 256MB PC133 SDRAM, CAS Level 3, 32x64 density. The system runs fine with any one or two out of three installed, but freezes at the 'UPDATE ESCD' prompt before booting from the hard disk with all three modules installed.
I tried tinkering with the bios, such as CAS levels, Precharge settings, and even forcing ESCD preset. No dice.
HELP! Abit can't help me. They're treating me like a leper cause I have a board not made in this decade.
Thanks
The modules are generic 256MB PC133 SDRAM, CAS Level 3, 32x64 density. The system runs fine with any one or two out of three installed, but freezes at the 'UPDATE ESCD' prompt before booting from the hard disk with all three modules installed.
I tried tinkering with the bios, such as CAS levels, Precharge settings, and even forcing ESCD preset. No dice.
HELP! Abit can't help me. They're treating me like a leper cause I have a board not made in this decade.
Thanks