FIC AD11 w/ DRR & 266MHZ FSB

[Guest]

Several months ago, I purchased a custom system from a no-name retailer that has a 1.4ghz athlon @266, 512mb DDR RAM @2100 or something through a FIC AD11 Mobo. The bus speed is only running at 133mhz and that is as high as it can go. Does that mean my CPU is running at 133 as well as the ram? Did I get screwed?

 

[o1die]

You may be able to run it at 138 fsb by changing the settings in the category at the upper right section of the bios in the first selection, but if your cpu is unlocked, you can raise the multiplier using the dip switches. Move the jumper next to the multiplier dip switches and try for 11.5 or 12.