I have just assembled a new PC with:
Asus A7M266
128MB PC2100 DDR
Athlon 1000
Geforce2mx
250W power supply.
When I turn it on everything seems to work perfectly except that the monitor won't turn on, and stays in standby, or if I turn it off and then on again it says "no signal" and then goes into standby again. The video card is working because I tried it on a different system. What else could it be? I left all jumperd and dipswithces in the motherboard to their default settings.
Any help would be greatly appreciated.
Thanks, Omar
If you've tested your video and it works fine with another monitor, then the problem probably lies in either the monitor or parts of it. Check the cable, for example. Check the pins on the adapter. Try plugging it into another system.
Rob
Please visit <b><A HREF="http://www.ncix.com/shop/index.cfm?affiliateid=319048" target="_new">http://www.ncix.com/shop/index.cfm?affiliateid=319048</A></b>
No, the monitor is perfect. It works on other computers and so does the video card. There are 3 components that could be faulty: the mothreboard (A7M 266), the CPU or the DDR RAM. Any idea on how to figure out which one?
Omar
I am having an almost similar problem. I have the Asus A7V and it won't pass the post. Can you help me out? (i have posted in the motherboards section of components, it's got all the details)
Thanks
AMD Tbird 1.1Ghz & SuperORB
Asus A7V
128MB PC133 SDRAM
Winfast GeForce2 MX
Win98 SE
You'll need to take the motherboard out and install the 1/8'' seperator, that'll make sure the mboard isn't touching the case which could cause a short (even fry your motherboard).
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.