5240 change cpu voltage

Archived from groups: alt.sys.pc-clone.compaq (More info?)

HI

I have a 5240 that I would like to upgrade with a low power version of a
k6 III . Does anyone one know how to set the CPU voltage on this motherboard ?
I have not been able to find and jumpers with lables for CPU voltage.

thanks in advance,

mpm

Archived from groups: alt.sys.pc-clone.compaq (More info?)

Thanks,

I looked on the board but not the case, will check tonight.

mpm



In article <G91yc.2$uv.0@fe25.usenetserver.com>, "HH" <hahunt42@hotmail.com>
wrote:
>No sticker inside the case? There should be one. JP3 sets the CPU core
>voltage. It's located near the front of the board inbetween the CMOS battery
>and the 15-pin connector for the Gameport, J23.
>
> JP3 (CPU core voltage select)
>
> VCC2H/L# low 2.0 2.1 2.2* 2.3± 2.4 2.5 2.6 2.7
> VCC2H/L# high 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5
> pins 1-2 off on off on off on off on
> pins 3-4 off off on on off off on on
> pins 5-6 off off off off on on on on
>
>
>The * indicates the factory setting for the preinstalled K6/2 450.
>
>HH
>
>
><bigfootmoormanDELETETHIS@yahoo.com> wrote in message
>news:3aXxc.375$Ny6.1109@mencken.net.nih.gov...
>> HI
>>
>> I have a 5240 that I would like to upgrade with a low power version of a
>> k6 III . Does anyone one know how to set the CPU voltage on this
>motherboard ?
>> I have not been able to find and jumpers with lables for CPU voltage.
>>
>> thanks in advance,
>>
>> mpm
>
>
>