XP error check

[Alan]

Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

After running error check from disc properties the results are flashed so
quickly I can't read them. Pause does'nt work. How do I do it? Thanks

 

[Guest]

Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

Next time, don't blink.

Or try this: Start > Run > type: cmd > click OK. A command environment
window will open (that looks similar to DOS, if you remember that far back.)
At the prompt type: chkdsk and press Enter. That runs disk error checking in
read-only mode, and you'll be able to see the results. Once you're done,
just 'X' out of the window.

--
Ted Zieglar
"You can do it if you try."

"alan" <alan@discussions.microsoft.com> wrote in message
news87120EC-E979-43E9-B994-A13FD8F1B055@microsoft.com...
> After running error check from disc properties the results are flashed so
> quickly I can't read them. Pause does'nt work. How do I do it? Thanks

 

[Alan]

Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

Thanks Ted-it works!
--
alan


"Ted Zieglar" wrote:

> Next time, don't blink.
>
> Or try this: Start > Run > type: cmd > click OK. A command environment
> window will open (that looks similar to DOS, if you remember that far back.)
> At the prompt type: chkdsk and press Enter. That runs disk error checking in
> read-only mode, and you'll be able to see the results. Once you're done,
> just 'X' out of the window.
>
> --
> Ted Zieglar
> "You can do it if you try."
>
> "alan" <alan@discussions.microsoft.com> wrote in message
> news87120EC-E979-43E9-B994-A13FD8F1B055@microsoft.com...
> > After running error check from disc properties the results are flashed so
> > quickly I can't read them. Pause does'nt work. How do I do it? Thanks
>
>
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.perform_maintain (More info?)

My pleasure.

--
Ted Zieglar
"You can do it if you try."

"alan" <odiestevie-web@yahoo.com> wrote in message
news:1F651276-26FF-42DD-A953-C4C20378BBCA@microsoft.com...
> Thanks Ted-it works!
> --
> alan
>
>
> "Ted Zieglar" wrote:
>
> > Next time, don't blink.
> >
> > Or try this: Start > Run > type: cmd > click OK. A command environment
> > window will open (that looks similar to DOS, if you remember that far
back.)
> > At the prompt type: chkdsk and press Enter. That runs disk error
checking in
> > read-only mode, and you'll be able to see the results. Once you're done,
> > just 'X' out of the window.
> >
> > --
> > Ted Zieglar
> > "You can do it if you try."
> >
> > "alan" <alan@discussions.microsoft.com> wrote in message
> > news87120EC-E979-43E9-B994-A13FD8F1B055@microsoft.com...
> > > After running error check from disc properties the results are flashed
so
> > > quickly I can't read them. Pause does'nt work. How do I do it?
Thanks
> >
> >
> >