Power Supply for Compaq

I want to upgrade the PSU on my Presario SR1320NX in order to run a higher-end video card. It has a Bestec 250W PSU with 20 pin connector and a 4 pin connector. From what I've seen, the only difference between this PSU and a regular one is that it has a "blank" pin where most have -5 volt. Now, assuming there is nothing physically keeping me from connecting it, could a normal PSU possibly work without doing damage?
1 answer Last reply
More about power supply compaq
  1. As long as the color code shows standard wire layout and it's not one of those weird Compaq power supplies with the front panel power button wired to it, a standard power supply should work. Then you just have to figure out if it will fit!

    <font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
    <font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
Ask a new question

Read More

Power Supplies Compaq Components