Tom's Hardware > Forum > CPU & Components > Power Supplies, PC Cases & Case Mods > Using only the led of a fan.
Ask the community Add a reply
Word :    Username :           
 
danizaken   09-23-2005 at 10:53:10 AM

I have a yate loon fan with leds lying here.
It's too noisy but i'd like to use only its led.
It has a molex connector with a red and black wires.
Is there any way i can do that?

Add a reply
Sponsored Links
Register or log in to remove.
danizaken   09-23-2005 at 03:50:33 PM
- 0 +

Which wire should i cut?
A red and black wire coming from the led are soldered into the fan motor. Then there are another two red and black wires, the black soldered into the first black and the red soldered serperatley. These wires go to the molex.
Should i cut the red wire, as it is soldered seperatley and won't disable the led?

Reply to danizaken
danizaken   09-23-2005 at 04:43:26 PM
- 0 +

In the end i cut the fan blades and tied the rotator so it won't move.

Reply to danizaken
Ask the community Add a reply
Tom's Hardware > Forum > CPU & Components > Power Supplies, PC Cases & Case Mods > Using only the led of a fan.
Go to:

There are 1194 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.284 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them