AGP and PCI buss speeds on OCed PC

[Guest]

What software can I use to check the actual AGP and PCI buss speeds of a PC?

I want to OC my P3-700 on a BX Mobo, but I don't know if (at 133 MHz FSB) it will set the AGP buss to 66 MHz (1/2 divider) and the PCI buss to 33 MHz (1/4 divider).

Spec's:

PIII-700 FCPGA - Slot 1 Adapter Card
Luckystar/Boardrunner 6ABX2V Ver. 3.1
128 MB PC-133 (1@128 MB)
Herculese Prophet Geforce2 MX
SB Live Value
D-Link 10/100
13 GB IDE (Seagate)

Thanks




Eek!

 

[Grizely1]

It will always keep the same divider settings. So if you upped it to 150FSB than the AGP BUS will be 75MHz and the PCI bus will be about 38MHz. (the dividers are still 1/2 and 1/4. For a 100MHZ FSB cpu by default it's 2/3 and 1/3.

 

[Guest]

Thanks, I figured that would be the case, but I would still like to measure the actual buss speeds. Do any of the freeware/shareware packages (3D Mark 2000, Performance test,...)report this info.? There are lots of utilities on <A HREF="http://www.tweakfiles.com" target="_new">http://www.tweakfiles.com</A>, but they don't specifically say if they measure the buss speeds in the descriptions.

Eek!

 

[phsstpok]

The SiSoft Sandra utilities will report AGP and PCI speeds in the Mainboard Information utility.

You can download Sandra at http://www.sisoftware.co.uk/sandra

 

[Guest]

Thanks


Eek!