some questions about over clocling duron750

[Guest]

Hi all i have a duron750 and got it to overclock to 1gig (7.5*133). I had to set the voltage to 1.825 but the motherboard and MBM 5 says it is 1.88v, the motherboard says it is @45c I think this is about 115f but MBM 5 says 39c how do I configer or find out the right temp, is it too hot
by the way im using a abit kt7133a thanks all

 

[phsstpok]

I don't know why you are getting two different temperature readings.

As for being too hot. The absolute temperature does not matter as each motherboard may read differently, even the same model. What matters is if your system is stable. Once you determine how high you can overclock, usually just below the point of instability, then make note of the idle temperature and max temperature at the unstable point. Knowing this you can try for additional cooling and hopefully overclock a little higher.