I have a KT7-Raid, with an Duron 800 and a 300wats pws.
I`ve chaged my multiplier to 10x so it would be 10 * 100 1ghz. But for one week or two, something strange started to happen: when i turned on the computer, the Multiplier was working on 8x (despite de fact that is set to 10x in the bios), and to get it working on 10x i have to restart several times.. go to windows, wait a little etc.. and then sometimes when I restart the multiplier is again working with 10x, until i turn off the computer for 2/3 hours. When the multiplier is working on 10x and i restart the computer it stays 10x, until i turn off the computer for a bigger period of time...
1.80 voltage
Help?!
§hadow_War
<P ID="edit"><FONT SIZE=-1><EM>Edited by shadow_war on 03/10/01 01:49 PM.</EM></FONT></P>
I`ve chaged my multiplier to 10x so it would be 10 * 100 1ghz. But for one week or two, something strange started to happen: when i turned on the computer, the Multiplier was working on 8x (despite de fact that is set to 10x in the bios), and to get it working on 10x i have to restart several times.. go to windows, wait a little etc.. and then sometimes when I restart the multiplier is again working with 10x, until i turn off the computer for 2/3 hours. When the multiplier is working on 10x and i restart the computer it stays 10x, until i turn off the computer for a bigger period of time...
1.80 voltage
Help?!
§hadow_War
<P ID="edit"><FONT SIZE=-1><EM>Edited by shadow_war on 03/10/01 01:49 PM.</EM></FONT></P>
Facebook
Twitter
Instagram