BH6 + celeron 667

[Guest]

anybody have any ideas on cooling a Celeron 667 running at 1 gig on a A-Bit bh6 slot one board with a socket adapter.<P ID="edit"><FONT SIZE=-1><EM>Edited by RERO on 03/22/01 09:59 PM.</EM></FONT></P>

 

[Guest]

you will be limited is fan size because of ps, dimm slot etc. mine was 64mm The alpha 6035 should work and maybe the alpha pal, I used a vantec big blue which is a cheapie and lapped the bottom and used arctic silver. I'm also running 2 case fans. only have mb temp probe so don't really know temp. im running. Stay away from orbs! Im running C600@ 927mhz. Hope this helps.

<b><i>"Bad advice is expensive, Good advice is priceless"