ATHLON OC - What about the L1 bridges ??
Last response: in Overclocking
Hello All!
I'm new to overclocking and just recently purchased an ASUS A7V133 MB and 1.2G 266FSB ATHLON. I set the multiplier at 10.5 and my system runs at 1400 (133X10.5) MHZ. I verified that the change took place by running a CPU benchmark. Why did'nt I have to close the L1 bridges on the CPU as per what I've read here ???
I'm new to overclocking and just recently purchased an ASUS A7V133 MB and 1.2G 266FSB ATHLON. I set the multiplier at 10.5 and my system runs at 1400 (133X10.5) MHZ. I verified that the change took place by running a CPU benchmark. Why did'nt I have to close the L1 bridges on the CPU as per what I've read here ???
More about : athlon bridges
Related ressources:
- ForumL1 Bridges
- Forumpencil - permanent for L1 bridges ?
- Forum1.2 GHz L1 Bridges Already Connected?!?
- ForumClosing L1 Bridges on Athlon B
- ForumPencil to close L1 bridges good or bad?
- ForumL1 Bridges to close or not to close.
- ForumClosing the L1 bridges ?
- ForumClosing L1 bridges with a HB crayon!
- ForumDuron 800 L1 bridges
- ForumAMD L1 Bridges
- ForumClosing Athlon XP L1 Bridges
- Forum1.2Ghz Athlon , L1 bridges closed from AMD
- ForumAthlon XP L1 pits already filled
- ForumL1 Bridge Trick ?
- ForumL1 Bridges
- ForumWhy should I join the L1 bridges ?
- ForumL1 bridges
- ForumCPU Question about L1 and L2Cache (AMD specific)
- Foruml1 bridges
- ForumShould I connect all my case fans to a PWM slot?
- More resources
Read discussions in other Overclocking categories
!
