Computer Freezes on boot

[gjkozick]

I'm running a T-Bird 900 on an Asus A7V rev. 1005B. I had no previous stability problems before I attempted to overclock. When I rebooted the computer after closing the bridges with a fine pencil, my CPU is detected as a T-Bird 900, but it freezes when it hits the bios line after detecting processor speed and ram. As such, I cannot get into bios and the computer freezes. What could be wrong. I don't believe that I have any of the bridges connected together.

Thanks

 

[peteb]

Did you change the FSB settings on the board or the voltage settings etc?

-* This Space For Rent *-
email for application details

 

[gjkozick]

I went back and re marked the bridges to ensure they were closed. It seems that my mobo is detecting the processor and memory fine, It freezes when it gets to loading Bios. The line is stops at says something similar to "Plug and Play Bios Revision 1.0A" of something of the like. It is a line below the memory test. I have no keyboard function and can thus not get into bios. It will accept a change in multiplier, unlike before my alterations. But, It will still not pass that line. Any suggestions would be helpful

 

[volton]

Try activating the dip switches on the mobo(in your manual)

" overclocking = better value "