Celeron Overclocking

[Guest]

I have an ABIT BE-6 mobo. Does anybody know if it will support a Celeron 600, and if so, what are the BIOS settings I need to use to overclock it? What is the best speed to overclock the C600 to, as far as stability goes?

All help greatly appreciated.

 

[Guest]

To run the c600 you will need a slotket card for the slot one mb, + decent cooling (watch dimensions on hs/fan)new bios flash and at least pc100 or pc133 memory. Set fsb to 100 (with turbo enabled if available), 9 multiplier. you get 900 or 928 with turbo. Multiplier cannot be changed. Core voltage 1.70 (default) or 1.75 should be enough. Im running older bh6/C600 @ 928 with no problems.

<b><i>"Bad advice is expensive, Good advice is priceless"

 

[Guest]

Currently I have a Celeron366 on my Abit BE-6 mobo, and I can't even get it to overclock. I tried the settings found here on the site, and I can't get past the POST screen. I'm not sure what I'm doing wrong, I assume I'm not setting something correctly in the BIOS.

Also, do you know where I can find the BIOS flash for the BE-6 mobo? Thanks for the response!

 

[Crashman]

uh, Abit maybe?
Seriously, go to <A HREF="http://www.abit.com.tw/english/index.htm" target="_new">http://www.abit.com.tw/english/index.htm</A> and follow the links. I prefer the Tiawanese website as listed in the link.


Suicide is painless...........