L1 Bridging

[Guest]

I just bought a 200MHz FSB 1.3 GHz Tbird
Can someone please tell me how to connect the L1 bridges with a pencil - is there four gold dots to connect, or two, and do I connect them vertically or horizontally? Anything else I need to know? Thanks
Also, what is the multiplier setting? is it 10 * 133? Ok thanks!

 

[Guest]

If it's a 200mhz then it would have to be 13*100, 200mhz DDR = 100mhz FSB. Thought the multipilier only went up to 12?? To have a multiplier of 10 it would need to be a 266mhz part, 266mhz ddr - 133mhz FSB .

To connect the dots, L1, the briges look like :::: unconnected. Connect each pair to look like IIII . Don't cross connect each pair with the other, bad things might happen...

<font color=blue>The #1 reason to upgrade your PC - to run faster benchmarks...</font color=blue>

 

[paulcalmond]

What 100mhz says is correct. In addition all Athlons 1.2Ghz 266FSB and above that I've heard about appear to be supplied with the L1 bridges connected (aka unlocked) I don't know if this applies to 200FSB parts as well.