Duron 650!

[Flash]

I got a duron 650! overclocked to 918 on a Asus A7V kt133
and i wonder why wount it go higher then that.. when i raise the multiplier to 9.5 X 100 then it dosen't post..
May the Agp divider have anything to do with it?? And when i rasie the FSB then it doesn't post..
low voltage?

 

[SerArthurDayne]

Could you list some more system specs?

Like your core voltage?

You may need a little more juice to get it stable at higher speeds, or maybe you need just a little more cooling to get it to post at higher heat levels. My Duron800 is only stable up to 1G with air cooling, but when tested with a peltier rig it went up to 1.25 stable. As to the fsb, how high are you trying to raise it? And are you setting the dividers yourself?

 

[Guest]

yeah, it must be the voltage. from what I hear durons don't like going over or even on the 1ghz level without lots of voltage and cooling better than air.

 

[Flash]

650@927 now (103*927)
vcore 1.85
I/O : 3.69
cooling: fop 38 full load: 38 degrees
AGP divider.. AGP strengh lowered.. P: A (C) N:C (E)
Is that the divider?

 

[phsstpok]

A quick check at the CPU Database at <A HREF="http://www.overclockers.com" target="_new">http://www.overclockers.com</A> shows that the average overclock for a Duron 650 is 909 mhz. That's among 397 participants in the survey.

<P ID="edit"><FONT SIZE=-1><EM>Edited by phsstpok on 06/05/01 10:11 PM.</EM></FONT></P>