Sign in with
Sign up | Sign in
Your question

How high AXIA core goes?

Last response: in Overclocking
Share
Anonymous
a b à CPUs
a b K Overclocking
June 30, 2001 1:47:44 PM

If I can't o'clock my bus on A7V at all, how high would AXIA 1Ghz go? if I set 1.85 voltage and put FOP38 on it then would it give me at least 100x12=1200Mhz?

More about : high axia core

June 30, 2001 3:52:43 PM

yep - that is pretty likely to work - people are getting axia 1G up to 1.4G+

-* This Space For Rent *-
email for application details
Anonymous
a b à CPUs
a b K Overclocking
June 30, 2001 4:02:05 PM

HOW??? A7V has maximum multiplier of 12.5!! How can I get 1.4Ghz from 1Ghz just using multiplier??? Do they use new DDR motherboards?
Related resources
June 30, 2001 4:12:16 PM

um - at which point in my post did I say YOU would be able to get it to run at 1.4G, I was merely stating that others do.

I think you'll find if you set it to 12.5X and your bios is up to date it will boot at 1300 (this is a BIOS hack to support the 1.3G 100/200FSB chips.) I seem to recall that setting the multiplier to 5x (since you cannot get a legitimate 500mhz socket AMD cpu) is the hack to boot at 1.4G 100/200 but I cannot guarentee this is correct or the feature for your board since I have the a7v133, which supports 133FSB+ anyway.

-* This Space For Rent *-
email for application details
June 30, 2001 4:50:50 PM

Well I know from my experience and others with AXIA (not sure about everyone), that some of them only OC to a multiplier of about 11.5x... you would have to put the FSB as high as you can on the A7V stably to achieve the maximum results....

---------
Grass is a beautiful weed
June 30, 2001 9:50:41 PM

My TB 1000 goes to 1400MHz (10.5*133) with 1.75V on A7V<b><font color=red>133</b></font color=red>.

:smile: Good or Bad have no meaning at all, depends on what your point of view is.
July 1, 2001 1:09:24 AM

My gig AXIA has done 150 x 10 on my Iwill KK266. Currently run at 145 x 9 or 1314 mhz. Nice and cool too. 1.75 v


These are my thoughts, your mileage may vary.
July 1, 2001 2:34:49 AM

Griz - have you re-tried since 1005a bios on the a7v133? I could bring my 1.33 up at 12x133 after 1005a which I absolutely could not prior to that bios version - it would not even try, but stick at 1466Mhz until then.

-* This Space For Rent *-
email for application details
July 1, 2001 2:41:46 AM

Seriously???? Sweet!!! I have not installed 1005a yet, I am having floppy problems (need a new floppy drive)...

---------
Grass is a beautiful weed
July 1, 2001 3:09:55 AM

I hate floppy drives!

-* This Space For Rent *-
email for application details
!