New to overclocking, need some help.

[Guest]

I'm buying an Intel Celeron 633 and I wan't to overclock it.
Here are the specs of my motherboard :
Processor: Intel® Celeron® 633MHz Processor
Motherboard: For Pentium® II/III, CeleronTM & Coppermine Processor, supports up to Socket 370 Pentium® III 850Mhz, 66.6MHz and 100MHz clocks. Intel® 810 Chipset with 2D/3D AGP Graphics Controller.

2 USB Connector
2 168-pin DIMM Sockets
PS/2 Mini-DIN keyboard and mouse ports
Audio Line-out, Line-in and Mic-in jacks

I looked around but couldn't find any celeron 633 specific overclocking guides. If you could direct me or help me in any way that would be great.

 

[D33]

very easy,
the best way to do that i beleive is to raise your fsb,
in order to do that you could:
1- hardware style:look for jumpers on your board that control your fsb, and try raising it to above 100,,like 120 or so, if you couldn't find any then
2- software style: look in your bios for fsb settings, and if you cannot then get yourself on of these programs:cpucool or cppufsb they will get the job done.

and don't forget to take in consideration heat problems and hardware compatibility, i guess you have no problem with you'r sound card because it is built in, but check if your vga/3d accelerator supports more than 33mhZ.
good luck, and let me know what happened.

 

[Guest]

Okay, Thanks a lot.

 

[Crashman]

Change the bus to 100, that makes it a 950, it's worth a try. You will probably need about 1.85v to get there.

Video killed my Radio Card!