OC AXIA

[flamethrower205]

Hi!
just recieved the CPU I won- it's a 1.2 Ghz 200MHz FSB, AXIA! What was the url link on overclocker's.com that gave how much u could OC to?

U got a problem?! Then dial 1800-328-7448!

 

[flamethrower205]

Correction- it;s a 266MHz FSB, cause I just found a slip of paper in there that says the CPU has been tested w/ 266MHz FSB and is fine.

U got a problem?! Then dial 1800-328-7448!

 

[munkey]

the link is <A HREF="http://overclockers.cssftware.com/cpudb/index.cfm" target="_new">http://overclockers.cssftware.com/cpudb/index.cfm</A>

<A HREF="http://www.textfiles.com/100/actung.hum" target="_new">Relaxen und watch das blinkenlights...</A>

 

[flamethrower205]

There was a whole chart as far as I remember. Alos, if I went from a 1.2 GHz to 1.5 Ghz or 1.6 GHz, how much woulfd i have to raise teh vcore?

U got a problem?! Then dial 1800-328-7448!

 

[flamethrower205]

Also, the max core voltage on my mobo is 1.85V. How can I raise this?

U got a problem?! Then dial 1800-328-7448!

 

[CALV]

Overclockers.com have a cpu database, follow the link from their homepage, I cant post link as im @ work.
1.85v is the max that most, if not all mobo's support, what board is it? I havea abit kt7a raid and modded the board as you can see <A HREF="http://www.calvsplace.cwc.net" target="_new">HERE</A> in the projects section.


Next time you wave - use all your fingers

 

[funkdog]

My guess is you'll get 1.4 to 1.5 max, at 1.85v. I personally run my Gig 'C' Axia week 9 Y at 1333 133x10. Have posted to windows at 150x10, and can run stable but hot at 145x10. Thinking of investing in the new Alpha Pal-8045 heatsink for shits and giggles.

<b>"These are my thoughts, your mileage may vary."

 

[flamethrower205]

I'm going w/ watercooling. Think I can get it to 1.7/1.8 w/ watercooling?

U got a problem?! Then dial 1800-328-7448!

 

[CALV]

I couldnt get that high with a 1 gig cpu, as you can see in <A HREF="http://www.calvsplace.cwc.net" target="_new">my watercooling project</A> maybe you will have better luck

Next time you wave - use all your fingers

 

[funkdog]

my guess with a 1.2 and watercooling, and an AXIA stepping....well is it a Y or a 9?? I think the limit for the AXIA core is 1.6-1.65 range. With normal water cooling, not talking liquid Nitrogen and all the fancy bells and whistles.

Dump the water cooling, run that baby stock, 1.2ghz is fast still, and invest the extra cash into a nice Ti Geforce 3 card. Sorry, my dreams not yours. Lol

1.6 tops.

<b>"These are my thoughts, your mileage may vary."