Overclocking a stock Geforce 2 Pro 64MB

[Quetzacoatl]

Hey everyone. I'm pretty new at this forum, so i'm giving it my best shot. I'm refurbishing my current computer until I upgrade this summer (part-time job). Currently the system consists of the following.

FIC AD-11 with Via chipset
AMD Athlon Thunderbird 1.0 Ghz 266Mhz FSB
2 sticks of 128MB PC-2100 DDR SDRAM
Nvidia Geforce 2 Pro 64MB retail version (AGP 4x interface)
SB Live! Value
32x/8x/4x CD-RW LG
7200 GB Maxtor 20GB

I'm planning on pretty much retiring the system this summer as my "main gaming" computer. But, I still know it has great potential as a networked computer so i'm going to experiment with it. First of all, the graphics card is from good 'ol Nvidia. Its the Geforce2 Pro with 64MB, not sure about the Mhz of the memory or the core speed, but I think the memory is 4ns DDR. Since i'm fixing up the system, I'm looking to overclocking the graphics card and processor. I guess i'm curious as to how and overlock a graphics card. Nothing special, but I wouldn't mind squeezing a bit of performance out of the good old card. If I can overclock it safely, how do I do so and what do I need? My next card i'm getting this summer is a Visiontek Geforce3 Ti200 for about $220.00 with warranty. I don't know if i'm going to attempt overclocking that one, but i'm open for suggestions. Other than that, i'm looking forward to a shiny new Athlon XP 2000+ to go with the mighty geforce3 Thanks for reading guys, i'm looking forward to a reply.

"Heh, I laugh when I see someone buying a Celeron 1300 over an Athlon Thunderbird 1000."

 

[Guest]

A geforce2 Pro normaly runs at 200/400 if i'm not mistaken.
However, if your memory is 4ns that means it can run at 500 Mhz DDR and beyond. That is normally only for a Geforce2 Ultra.
If you want to OC you're card, try to OC the memory first (in steps of 5-10 mhz) since it gives the best performance boost. Run a 3D program after eacht tweak and check for stability and screen artifacts (3D rendering errors), if these occus you have reached the max speed. After the memory, do the same with the core.

My geforce2 pro runs at 220/430