Can I increase the FSB???

[Guest]

I'm brand new to this.........I have a Celeron 1GHz and I think a Intel D810E2CB motherboard. Can I raise the FSB from 100MHz to 133MHz?
If so, how do I do it & will I need better cooling?

Thanks in advance

 

[marneus]

I dont think a Celeron can use have 133fsb... this would be for a P3-P4 processor

---If at first you dont succeed... get a bigger hammer... that'll teach it !!!---

 

[girish]

intel boards cannot be overclocked, and they do not have any kind of settings to change either the FSB or core voltage. you will need to modify the processor to fool the board into setting higher core voltage (needed for higher core clocks) with VID pins and 133 MHz FSB with FID pins.

check the processor manual, and connect the pins to proper supply pins so that they can be pulled to either low or high voltage levels. there are abundant power supply pins spread all around the package.

girish

<font color=red>Nothing is fool-proof. Fools are Ingenious!</font color=red>

 

[Crashman]

That would push the processor to 1333, far beyond its reach.

What's the frequency, Kenneth?