FAX MONITOR NOT POPPING UP

Archived from groups: microsoft.public.windowsxp.print_fax (More info?)

Hi, when I send or receive a fax (WinXP Home) the Fax Monitor box does not
pop up, although it is set to do so in the settings.

Faxes send ok, but no notification (No Fax Monitor & no sound alert) that
the send was succesful.

It used to work ok, then one day it just stopped working. Tried several
reinstalls but still the same.

When I changed hard disk drive and reinstalled windows, then updated
Windows, the Fax Monitor still failed to open.

Anyone know how to fix this?

Archived from groups: microsoft.public.windowsxp.print_fax (More info?)

What do you know about fax viruses that haven't been ‘updated’ or made aware
to virus protection software? Apparently I have caught a virus called
'blackicefax' that successfully attacked my fax program. I quarantined it in
Norton, but can't send it to them for investigation, (must be programmed that
way). This quarantine helped temporarily, but I am now having major issues.
Nothing worked on the fax program so I tried to reinstall by way of remove
component and then install component. The removal was a success….however,
now... nothing comes up, the fax folder remains 'empty' after several
attempts to re-install the MFax component.

"Russ Valentine [MVP-Outlook]" wrote:

> A number of standard update and repair procedures disabled the Fax Monitor
> in the initial release of Windows XP. These problems were fixed in Service
> Pack 1. Make sure you apply SP1 if you notice this problem. The following
> may also apply:
>
> http://service1.symantec.com/SUPPO [...] enDocument
> Error: "Rule Default Block Netspy Trojan Horse Matched" when you start the
> computer
> http://service1.symantec.com/SUPPO [...] enDocument
> Microsoft Fax Monitor does not function properly after installing Norton
> Internet Security
>
>
> --
> Russ Valentine
> [MVP-Outlook]
> "Jack" <Jack@discussions.microsoft.com> wrote in message
> news:9BF6CB72-4BC2-4A44-871A-6224EBC6EC73@microsoft.com...
> > Hi, when I send or receive a fax (WinXP Home) the Fax Monitor box does not
> > pop up, although it is set to do so in the settings.
> >
> > Faxes send ok, but no notification (No Fax Monitor & no sound alert) that
> > the send was succesful.
> >
> > It used to work ok, then one day it just stopped working. Tried several
> > reinstalls but still the same.
> >
> > When I changed hard disk drive and reinstalled windows, then updated
> > Windows, the Fax Monitor still failed to open.
> >
> > Anyone know how to fix this?
>
>
>

Archived from groups: microsoft.public.windowsxp.print_fax (More info?)

As usual, Symantec drops the ball on the innumerable problems they cause.
The only thing you could do is set the Fax Service to start manually, then
do start it after Windows has finished loading.
--
Russ Valentine
[MVP-Outlook]
"Jack" <Jack@discussions.microsoft.com> wrote in message
news423A97F-5BE0-4559-AB54-DC52407B138C@microsoft.com...
> Hi Russ, thanks for your reply. Tried everything and nothing worked,
> except
> if I disable Norton Internet Security on startup, turn my cable modem off,
> then reboot, wait for everything to load, then enable NIS and turn my
> cable
> modem back on. It is a nuisance having to do this and I am looking for a
> permanent fix.
>
> This is all Symantec have to say "This problem may be due to a timing
> conflict between Norton Internet Security and Microsoft Fax Monitor. To
> prevent a timing conflict, change when Microsoft Fax Monitor loads on
> startup
> so that it loads after Windows starts. Contact Microsoft or your computer
> vendor for assistance."
>
> This sounds like what needs to be done but how do I stop the fax monitor
> loading till after windows has loaded?
>
>
> "Russ Valentine [MVP-Outlook]" wrote:
>
>> A number of standard update and repair procedures disabled the Fax
>> Monitor
>> in the initial release of Windows XP. These problems were fixed in
>> Service
>> Pack 1. Make sure you apply SP1 if you notice this problem. The following
>> may also apply:
>>
>> http://service1.symantec.com/SUPPO [...] enDocument
>> Error: "Rule Default Block Netspy Trojan Horse Matched" when you start
>> the
>> computer
>> http://service1.symantec.com/SUPPO [...] enDocument
>> Microsoft Fax Monitor does not function properly after installing Norton
>> Internet Security
>>
>>
>> --
>> Russ Valentine
>> [MVP-Outlook]
>> "Jack" <Jack@discussions.microsoft.com> wrote in message
>> news:9BF6CB72-4BC2-4A44-871A-6224EBC6EC73@microsoft.com...
>> > Hi, when I send or receive a fax (WinXP Home) the Fax Monitor box does
>> > not
>> > pop up, although it is set to do so in the settings.
>> >
>> > Faxes send ok, but no notification (No Fax Monitor & no sound alert)
>> > that
>> > the send was succesful.
>> >
>> > It used to work ok, then one day it just stopped working. Tried
>> > several
>> > reinstalls but still the same.
>> >
>> > When I changed hard disk drive and reinstalled windows, then updated
>> > Windows, the Fax Monitor still failed to open.
>> >
>> > Anyone know how to fix this?
>>
>>
>>