Any Way to Autostart Drives in 4214R?

[Guest]

Archived from groups: alt.sys.pc-clone.compaq,alt.sys.pc-clone.compaq.servers (More info?)

Is there any way to force drives that are inserted into a 4214R drive array
to autostart? Apparently the host is sending the start unit to these
drives by default. I have an application exposing drives through fibre
channel where the start unit is not sent by the host, and I need the drive
to be started on insertion by the drive array itself.

--
Will
Internet: westes AT earthbroadcast.com

 

[Guest]

Archived from groups: alt.sys.pc-clone.compaq,alt.sys.pc-clone.compaq.servers (More info?)

FibreChannel ... is that an RA4000 or RA4100? Some other HPaq fibrechannel
system ?

- LC

"Will" <DELETE_westes@earthbroadcast.com> wrote in message
news:mN2dnQr_Pus0OAbfRVn-qw@giganews.com...
> Is there any way to force drives that are inserted into a 4214R drive
> array
> to autostart? Apparently the host is sending the start unit to these
> drives by default. I have an application exposing drives through fibre
> channel where the start unit is not sent by the host, and I need the drive
> to be started on insertion by the drive array itself.
>
> --
> Will
> Internet: westes AT earthbroadcast.com
>
>
>

 

[Guest]

Archived from groups: alt.sys.pc-clone.compaq,alt.sys.pc-clone.compaq.servers (More info?)

I'm using an ADIC fibre channel bridge in front of a straight SCSI LVD 4214R
enclosure.

We want to be able to boot from the drives in the enclosure, which is why we
didn't use the RA4100 for this application. That controller works fine for
data but simply doesn't get seen as a boot device, probably because the
special Compaq fibre channel host adapters have no configurable BIOS and
cannot have BIOS enabled.

--
Will
Internet: westes AT earthbroadcast.com


"NuTCrAcKeR" <nutcracker@internationalhacker.org> wrote in message
news:4vKdnfJX0aK0JAbfRVn-oQ@speakeasy.net...
> FibreChannel ... is that an RA4000 or RA4100? Some other HPaq fibrechannel
> system ?
>
> - LC

 

[Guest]

Archived from groups: alt.sys.pc-clone.compaq,alt.sys.pc-clone.compaq.servers (More info?)

what HBA's are you using? its less a function of the FCAL bridge/switch you
are using, and more a factor of the HBA's. True, the RA4x00 doesnt allow you
to boot from that storage whilst using the StorageWorks /P (32bit and 64bit)
adapters, but I have often wondered if it could be bootable (if properly
presented) to a QLogic or Emulex HBA that has the boot bios on the card.

- LC

"Will" <DELETE_westes@earthbroadcast.com> wrote in message
news:d6WdncSeGJGlSgbfRVn-3A@giganews.com...
> I'm using an ADIC fibre channel bridge in front of a straight SCSI LVD
> 4214R
> enclosure.
>
> We want to be able to boot from the drives in the enclosure, which is why
> we
> didn't use the RA4100 for this application. That controller works fine
> for
> data but simply doesn't get seen as a boot device, probably because the
> special Compaq fibre channel host adapters have no configurable BIOS and
> cannot have BIOS enabled.
>
> --
> Will
> Internet: westes AT earthbroadcast.com
>
>
> "NuTCrAcKeR" <nutcracker@internationalhacker.org> wrote in message
> news:4vKdnfJX0aK0JAbfRVn-oQ@speakeasy.net...
>> FibreChannel ... is that an RA4000 or RA4100? Some other HPaq
>> fibrechannel
>> system ?
>>
>> - LC
>
>

 

[Guest]

Archived from groups: alt.sys.pc-clone.compaq,alt.sys.pc-clone.compaq.servers (More info?)

Oh, and there is a way to make the drives autostart ... you have to take
them out of thier trays, and make sure that the MTR STR jumper is shunted.
That way, the drives will spin up when they get power. Thats standard on all
SCSI drives.

- LC

"NuTCrAcKeR" <nutcracker@internationalhacker.org> wrote in message
news:voSdnQjrqKEMQQbfRVn-hQ@speakeasy.net...
> what HBA's are you using? its less a function of the FCAL bridge/switch
> you are using, and more a factor of the HBA's. True, the RA4x00 doesnt
> allow you to boot from that storage whilst using the StorageWorks /P
> (32bit and 64bit) adapters, but I have often wondered if it could be
> bootable (if properly presented) to a QLogic or Emulex HBA that has the
> boot bios on the card.
>
> - LC
>
> "Will" <DELETE_westes@earthbroadcast.com> wrote in message
> news:d6WdncSeGJGlSgbfRVn-3A@giganews.com...
>> I'm using an ADIC fibre channel bridge in front of a straight SCSI LVD
>> 4214R
>> enclosure.
>>
>> We want to be able to boot from the drives in the enclosure, which is why
>> we
>> didn't use the RA4100 for this application. That controller works fine
>> for
>> data but simply doesn't get seen as a boot device, probably because the
>> special Compaq fibre channel host adapters have no configurable BIOS and
>> cannot have BIOS enabled.
>>
>> --
>> Will
>> Internet: westes AT earthbroadcast.com
>>
>>
>> "NuTCrAcKeR" <nutcracker@internationalhacker.org> wrote in message
>> news:4vKdnfJX0aK0JAbfRVn-oQ@speakeasy.net...
>>> FibreChannel ... is that an RA4000 or RA4100? Some other HPaq
>>> fibrechannel
>>> system ?
>>>
>>> - LC
>>
>>
>
>

 

[Guest]

Archived from groups: alt.sys.pc-clone.compaq,alt.sys.pc-clone.compaq.servers (More info?)

The answer is no for QLogic. I've heard rumors the answer is yes with
Emulex, but I haven't had the time to figure it out. RA4100 is very
proprietary stuff, that's for sure.

I'll look for the jumpers and hopefully that will work.

--
Will
Internet: westes AT earthbroadcast.com


"NuTCrAcKeR" <nutcracker@internationalhacker.org> wrote in message
news:voSdnQjrqKEMQQbfRVn-hQ@speakeasy.net...
> what HBA's are you using? its less a function of the FCAL bridge/switch
you
> are using, and more a factor of the HBA's. True, the RA4x00 doesnt allow
you
> to boot from that storage whilst using the StorageWorks /P (32bit and
64bit)
> adapters, but I have often wondered if it could be bootable (if properly
> presented) to a QLogic or Emulex HBA that has the boot bios on the card.
>
> - LC
>
> "Will" <DELETE_westes@earthbroadcast.com> wrote in message
> news:d6WdncSeGJGlSgbfRVn-3A@giganews.com...
> > I'm using an ADIC fibre channel bridge in front of a straight SCSI LVD
> > 4214R
> > enclosure.
> >
> > We want to be able to boot from the drives in the enclosure, which is
why
> > we
> > didn't use the RA4100 for this application. That controller works fine
> > for
> > data but simply doesn't get seen as a boot device, probably because the
> > special Compaq fibre channel host adapters have no configurable BIOS and
> > cannot have BIOS enabled.
> >
> > --
> > Will
> > Internet: westes AT earthbroadcast.com
> >
> >
> > "NuTCrAcKeR" <nutcracker@internationalhacker.org> wrote in message
> > news:4vKdnfJX0aK0JAbfRVn-oQ@speakeasy.net...
> >> FibreChannel ... is that an RA4000 or RA4100? Some other HPaq
> >> fibrechannel
> >> system ?
> >>
> >> - LC
> >
> >
>
>