Hey,
Ok I'm tryna overclock my pc, too start with i had the stock P4 cooler and could only get stable with prime95 at 138FSB. So I got me a Alpha8942/Delta 46CFM@40dBA fan, my temps dropped 2°C and could get to 140FSB, I reaplied Arctic silver 3 the other day and my temps have dropped another 2°C now at 38-39°C Idle 50°C load , my case temps are 24-26°C now i can get to 142FSB stable with raising the voltage just a tad.
Is it normal for the cpu temp to be around 15°C more then the case temps????
I was thinking about getting a smartfan 2 rated at 76CFM @48dBA would my temps drop about 5°C??? And does is it really move that much air???
I have 2 front intakes 1xEnermax and 1xAntec(came with the case), 2 rear exhaust fans 1xEnermax and 1xAntec(came with the case) and 1 side intake on the gfx card 1xAntec(came with the case) all 8cm fans, and a 12cm enermax fan installed at teh 2nd pci slot level blowing up to the gfx card.
My system specs are:
P4 2.8GHz
Gigabyte GA-8IHXP rev2.1
1Gig Samsung CT9 RDRAM
ASUS GF2MX herc 9700pro arriving soon
Turtlebeach santa cruz
Western digital 120Gb Special Edition
Antec 1080AMG w/430W truepower PSU
Anyone any idea's what i could do to get my overclock higher, the Smartfan 2 is the highest CFM fan i can find, all the others are maxed at 50cfm with the same dBA that are available to me
And if I get this fan where should I move my delta to intake or exhaust????
Thanks for your help in advance
Ok I'm tryna overclock my pc, too start with i had the stock P4 cooler and could only get stable with prime95 at 138FSB. So I got me a Alpha8942/Delta 46CFM@40dBA fan, my temps dropped 2°C and could get to 140FSB, I reaplied Arctic silver 3 the other day and my temps have dropped another 2°C now at 38-39°C Idle 50°C load , my case temps are 24-26°C now i can get to 142FSB stable with raising the voltage just a tad.
Is it normal for the cpu temp to be around 15°C more then the case temps????
I was thinking about getting a smartfan 2 rated at 76CFM @48dBA would my temps drop about 5°C??? And does is it really move that much air???
I have 2 front intakes 1xEnermax and 1xAntec(came with the case), 2 rear exhaust fans 1xEnermax and 1xAntec(came with the case) and 1 side intake on the gfx card 1xAntec(came with the case) all 8cm fans, and a 12cm enermax fan installed at teh 2nd pci slot level blowing up to the gfx card.
My system specs are:
P4 2.8GHz
Gigabyte GA-8IHXP rev2.1
1Gig Samsung CT9 RDRAM
ASUS GF2MX herc 9700pro arriving soon
Turtlebeach santa cruz
Western digital 120Gb Special Edition
Antec 1080AMG w/430W truepower PSU
Anyone any idea's what i could do to get my overclock higher, the Smartfan 2 is the highest CFM fan i can find, all the others are maxed at 50cfm with the same dBA that are available to me
And if I get this fan where should I move my delta to intake or exhaust????
Thanks for your help in advance