MSI Kt3 Ultra2

[tombo3k]

I own a MSI Kt3 Ultra3 motherboard and 512 2700 memory. I have a Athlon XP 1800+ overclocked to 150 x 11.5. When I try to go up to 155 x 11.5 the graphics start crapping out when im booting XP and errors keep poppin up. So i raised the voltage to the CPU and Memory and the errors are still there. Is this the extent of the motherboards OC'ing??? Oh yea I put the memory on most conservative timings while trying this also.

 

[Monkeymagic]

Is it a Palamino you have? If so you won't be able to get the FSB higher than 150. I run a Palamino 1800 on a MSI KT3 Ulta ARU. 150 FSB is the fastest it will go!

 

[svol]

It could be that your graphiccard can't handle the increased AGP speed as increasing the FSB means increasing the AGP to. Your AGP is normally 1/2 of 133 MHz which is 66 MHz... with 155 MHz FSB this will be 78 MHz. So may I aks which card you have?

My CPU fan spins so fast that it creates a wormhole

 

[tombo3k]

Its a GeForce 2 GTS w/ 32 megs of ram. I dont know if its a palamino or not.... *Edit* Its model 8 according to WCPUID which means is a TbredB.... Is it just the agp bus is too high? If so is there a way to make it stable again? THanks

<P ID="edit"><FONT SIZE=-1><EM>Edited by tombo3k on 06/20/03 05:48 PM.</EM></FONT></P>

 

[error_911]

thats one of the problems with the KT3 motherboards (i've got one too, welcome to the club) - you can't adjust the AGP PCI bus mastering... you might want to try raising the AGP voltage though

<b>I have nothing better to say</b>

 

[tombo3k]

Cool, I will try that =). Thanks for the replies