Power supply question (HH?)..

Archived from groups: alt.sys.pc-clone.compaq (More info?)

Hi, all...

Can anyone verify if the 5000T (5BW/ m'board #191767 which I believe is a
Mitac 6513wu) has a standard ATX power supply?


Thank you!
--
B'Regards,

Vinnie
8 answers Last reply
More about power supply question
  1. Archived from groups: alt.sys.pc-clone.compaq (More info?)

    PS: Original PS part # 124848-001 (145 Watt? Not very much is it.)

    Thank you!


    "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    news:BRLDe.246$mf5.124@fe12.lga...
    > Hi, all...
    >
    > Can anyone verify if the 5000T (5BW/ m'board #191767 which I believe is a
    > Mitac 6513wu) has a standard ATX power supply?
    >
    >
    > Thank you!
    > --
    > B'Regards,
    >
    > Vinnie
    >
    >
  2. Archived from groups: alt.sys.pc-clone.compaq (More info?)

    If It is the 5BWN21 you are referring to (Micro ATX board), it looks like a
    Standard ATX supply. Here are the specs:

    5000t Power Supply
    U. S. Outside U. S.
    Input Specifications
    Voltage Switch Setting 115 V 230 V
    Nominal Line Voltage 115 VAC 230 VAC
    Range Input Line 90 to 132 VAC 180 to 264 VAC
    Frequency Range 47 to 63 Hz 47 to 63 Hz
    Power Factor 0.55 0.55
    Input Power 310 Watts 310 Watts
    Input Current 6 at 90 VAC 3 at 180 VAC
    Inrush Current 65 A at 115 VAC
    (cold start) 65 A at 230 VAC
    (cold start)
    Holdup Time 16 ms from zero crossing at 120 VAC 16 ms from zero
    crossing at 240 VAC
    Steady State (Max Power) 235 Watts 235 Watts
    General Specifications
    Full Output Rating To 122° F and 5,000 ft
    To 90° F and 10,000 ft (derate linearly) To 50° C and 1524 m
    To 32° C and 3048 m (derate linearly)
    Minimum Load 1.4 A on + 5.0 V output; 0.07 A on
    12 V output 1.4 A on + 5.0 V output; 0.07 A on
    12 V output
    Ambient Temperature Range
    Operating 50° to 122° F 10° to 50° C
    Storage -40° to 151° F -40° to 66° C
    Dielectric Voltage Withstand
    Input to Ground 1500 VAC/1 second
    Safety Standard UL 1950; CSA 22.2 950; TUV/VDE EN 60 950
    (VDE0805/11.91); EMKO-TSE (74-SEC) 207/94
    Input Transient Susceptibility
    Common and Differential Mode
    (superimposed on AC line) 2500 V, 1 us, damped sinusoid
    600 V, 10 us pulse
    Differential Mode 20% step change in AC input voltage


    HH


    "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    news:pUMDe.2335$Qy1.1290@fe09.lga...
    > PS: Original PS part # 124848-001 (145 Watt? Not very much is it.)
    >
    > Thank you!
    >
    >
    > "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    > news:BRLDe.246$mf5.124@fe12.lga...
    >> Hi, all...
    >>
    >> Can anyone verify if the 5000T (5BW/ m'board #191767 which I believe is a
    >> Mitac 6513wu) has a standard ATX power supply?
    >>
    >>
    >> Thank you!
    >> --
    >> B'Regards,
    >>
    >> Vinnie
    >>
    >>
    >
    >
  3. Archived from groups: alt.sys.pc-clone.compaq (More info?)

    Thanks, HH.

    It appears to be a micro ATX, and the PS appear to be standard. The part
    numbers I refer to are the ones on both the board and the PS.

    I cannot understand how the Power Supply can only be 145 watts. These
    references are constant everywhere I look, and what I have from Compaq. The
    unit is running maxed out- 1.2 Tualatin (w/adapter), 512meg mem, floppy, 40g
    HD, DVD, CD/RW, 512 mem (2x256's), modem, firewire, NIC, all 4 USB's used...

    I was thinking of adding a 2nd HD, how can this all run on only 145 watts???
    My daughter's Intel needs 300+, same config except that she also has a TV
    board?

    Hence, why I was thinking of upgrading the PS to a 230 I have on hand...


    "HH" <hahunt42@kgexpress.net> wrote in message
    news:t7NDe.12$CS2.854@news.uswest.net...
    > If It is the 5BWN21 you are referring to (Micro ATX board), it looks like
    > a Standard ATX supply. Here are the specs:
    >
    > 5000t Power Supply
    > U. S. Outside U. S.
    > Input Specifications
    > Voltage Switch Setting 115 V 230 V
    > Nominal Line Voltage 115 VAC 230 VAC
    > Range Input Line 90 to 132 VAC 180 to 264 VAC
    > Frequency Range 47 to 63 Hz 47 to 63 Hz
    > Power Factor 0.55 0.55
    > Input Power 310 Watts 310 Watts
    > Input Current 6 at 90 VAC 3 at 180 VAC
    > Inrush Current 65 A at 115 VAC
    > (cold start) 65 A at 230 VAC
    > (cold start)
    > Holdup Time 16 ms from zero crossing at 120 VAC 16 ms from zero
    > crossing at 240 VAC
    > Steady State (Max Power) 235 Watts 235 Watts
    > General Specifications
    > Full Output Rating To 122° F and 5,000 ft
    > To 90° F and 10,000 ft (derate linearly) To 50° C and 1524 m
    > To 32° C and 3048 m (derate linearly)
    > Minimum Load 1.4 A on + 5.0 V output; 0.07 A on
    > 12 V output 1.4 A on + 5.0 V output; 0.07 A on
    > 12 V output
    > Ambient Temperature Range
    > Operating 50° to 122° F 10° to 50° C
    > Storage -40° to 151° F -40° to 66° C
    > Dielectric Voltage Withstand
    > Input to Ground 1500 VAC/1 second
    > Safety Standard UL 1950; CSA 22.2 950; TUV/VDE EN 60 950
    > (VDE0805/11.91); EMKO-TSE (74-SEC) 207/94
    > Input Transient Susceptibility
    > Common and Differential Mode
    > (superimposed on AC line) 2500 V, 1 us, damped sinusoid
    > 600 V, 10 us pulse
    > Differential Mode 20% step change in AC input voltage
    >
    >
    > HH
    >
    >
    > "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    > news:pUMDe.2335$Qy1.1290@fe09.lga...
    >> PS: Original PS part # 124848-001 (145 Watt? Not very much is it.)
    >>
    >> Thank you!
    >>
    >>
    >> "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    >> news:BRLDe.246$mf5.124@fe12.lga...
    >>> Hi, all...
    >>>
    >>> Can anyone verify if the 5000T (5BW/ m'board #191767 which I believe is
    >>> a Mitac 6513wu) has a standard ATX power supply?
    >>>
    >>>
    >>> Thank you!
    >>> --
    >>> B'Regards,
    >>>
    >>> Vinnie
    >>>
    >>>
    >>
    >>
    >
    >
  4. Archived from groups: alt.sys.pc-clone.compaq (More info?)

    Actually, mine might be the 5BW-001. It was shipped as 5BMW-CTO. Only
    afterwards, I was told by Tech support they were calling it a 5BW, of which
    there are many different types. But the part numbers I listed are the part
    numbers on the parts themselves, particularly the p/s.


    "HH" <hahunt42@kgexpress.net> wrote in message
    news:t7NDe.12$CS2.854@news.uswest.net...
    > If It is the 5BWN21 you are referring to (Micro ATX board), it looks like
    > a Standard ATX supply. Here are the specs:
    >
    > 5000t Power Supply
    > U. S. Outside U. S.
    > Input Specifications
    > Voltage Switch Setting 115 V 230 V
    > Nominal Line Voltage 115 VAC 230 VAC
    > Range Input Line 90 to 132 VAC 180 to 264 VAC
    > Frequency Range 47 to 63 Hz 47 to 63 Hz
    > Power Factor 0.55 0.55
    > Input Power 310 Watts 310 Watts
    > Input Current 6 at 90 VAC 3 at 180 VAC
    > Inrush Current 65 A at 115 VAC
    > (cold start) 65 A at 230 VAC
    > (cold start)
    > Holdup Time 16 ms from zero crossing at 120 VAC 16 ms from zero
    > crossing at 240 VAC
    > Steady State (Max Power) 235 Watts 235 Watts
    > General Specifications
    > Full Output Rating To 122° F and 5,000 ft
    > To 90° F and 10,000 ft (derate linearly) To 50° C and 1524 m
    > To 32° C and 3048 m (derate linearly)
    > Minimum Load 1.4 A on + 5.0 V output; 0.07 A on
    > 12 V output 1.4 A on + 5.0 V output; 0.07 A on
    > 12 V output
    > Ambient Temperature Range
    > Operating 50° to 122° F 10° to 50° C
    > Storage -40° to 151° F -40° to 66° C
    > Dielectric Voltage Withstand
    > Input to Ground 1500 VAC/1 second
    > Safety Standard UL 1950; CSA 22.2 950; TUV/VDE EN 60 950
    > (VDE0805/11.91); EMKO-TSE (74-SEC) 207/94
    > Input Transient Susceptibility
    > Common and Differential Mode
    > (superimposed on AC line) 2500 V, 1 us, damped sinusoid
    > 600 V, 10 us pulse
    > Differential Mode 20% step change in AC input voltage
    >
    >
    > HH
    >
    >
    > "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    > news:pUMDe.2335$Qy1.1290@fe09.lga...
    >> PS: Original PS part # 124848-001 (145 Watt? Not very much is it.)
    >>
    >> Thank you!
    >>
    >>
    >> "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    >> news:BRLDe.246$mf5.124@fe12.lga...
    >>> Hi, all...
    >>>
    >>> Can anyone verify if the 5000T (5BW/ m'board #191767 which I believe is
    >>> a Mitac 6513wu) has a standard ATX power supply?
    >>>
    >>>
    >>> Thank you!
    >>> --
    >>> B'Regards,
    >>>
    >>> Vinnie
    >>>
    >>>
    >>
    >>
    >
    >
  5. Archived from groups: alt.sys.pc-clone.compaq (More info?)

    Upgrading to a higher wattage power supply would be prudent. Compaq, HP,
    eMachines, IBM, Packard Bell (RIP), all of them shipped Pentium-class computers
    with 145w (or even less) power supplies. Their working assumptions for doing so
    are two-fold: cost savings and support ONLY for the configuration shipped, with
    little margin for error.

    This is yet another example of how much personal computers have become
    commodities. Sadly, unlike other commodities (apples, oranges, automobiles),
    the consumer has little or know opportunity to see what is under the hood of a
    computer before buying. So name brand manufacturers continue to build
    consumer-oriented boxed with cheap junk parts inside, showing great disrespect
    for their customers. Business-class computers are generally better made,
    because a large enterprise has the clout to park all the malfunctioning or
    poorly made computers on the loading dock and tell the manufacturer to take them
    all away... Ben Myers

    On Thu, 21 Jul 2005 09:43:39 -0400, "Uncle Vinnie"
    <vinrin57@nospam.optonline.net> wrote:

    >Thanks, HH.
    >
    >It appears to be a micro ATX, and the PS appear to be standard. The part
    >numbers I refer to are the ones on both the board and the PS.
    >
    >I cannot understand how the Power Supply can only be 145 watts. These
    >references are constant everywhere I look, and what I have from Compaq. The
    >unit is running maxed out- 1.2 Tualatin (w/adapter), 512meg mem, floppy, 40g
    >HD, DVD, CD/RW, 512 mem (2x256's), modem, firewire, NIC, all 4 USB's used...
    >
    >I was thinking of adding a 2nd HD, how can this all run on only 145 watts???
    >My daughter's Intel needs 300+, same config except that she also has a TV
    >board?
    >
    >Hence, why I was thinking of upgrading the PS to a 230 I have on hand...
    >
    >
    <SNIP>
  6. Archived from groups: alt.sys.pc-clone.compaq (More info?)

    I hear you Ben... amazing...but I'm not surprised.

    You, by chance, wouldn't know for sure if this is a standard ATX power
    supply, would you?? I have a spare Powerman 230w I was going to put in....


    <ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
    news:42dfb95c.1271410@nntp.charter.net...
    > Upgrading to a higher wattage power supply would be prudent. Compaq, HP,
    > eMachines, IBM, Packard Bell (RIP), all of them shipped Pentium-class
    > computers
    > with 145w (or even less) power supplies. Their working assumptions for
    > doing so
    > are two-fold: cost savings and support ONLY for the configuration shipped,
    > with
    > little margin for error.
    >
    > This is yet another example of how much personal computers have become
    > commodities. Sadly, unlike other commodities (apples, oranges,
    > automobiles),
    > the consumer has little or know opportunity to see what is under the hood
    > of a
    > computer before buying. So name brand manufacturers continue to build
    > consumer-oriented boxed with cheap junk parts inside, showing great
    > disrespect
    > for their customers. Business-class computers are generally better made,
    > because a large enterprise has the clout to park all the malfunctioning or
    > poorly made computers on the loading dock and tell the manufacturer to
    > take them
    > all away... Ben Myers
    >
    > On Thu, 21 Jul 2005 09:43:39 -0400, "Uncle Vinnie"
    > <vinrin57@nospam.optonline.net> wrote:
    >
    >>Thanks, HH.
    >>
    >>It appears to be a micro ATX, and the PS appear to be standard. The part
    >>numbers I refer to are the ones on both the board and the PS.
    >>
    >>I cannot understand how the Power Supply can only be 145 watts. These
    >>references are constant everywhere I look, and what I have from Compaq.
    >>The
    >>unit is running maxed out- 1.2 Tualatin (w/adapter), 512meg mem, floppy,
    >>40g
    >>HD, DVD, CD/RW, 512 mem (2x256's), modem, firewire, NIC, all 4 USB's
    >>used...
    >>
    >>I was thinking of adding a 2nd HD, how can this all run on only 145
    >>watts???
    >>My daughter's Intel needs 300+, same config except that she also has a TV
    >>board?
    >>
    >>Hence, why I was thinking of upgrading the PS to a 230 I have on hand...
    >>
    >>
    > <SNIP>
  7. Archived from groups: alt.sys.pc-clone.compaq (More info?)

    This site may be of some help, www.power-on.com

    KC
    "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    news:nOPDe.10705$_x.9865@fe11.lga...
    > Actually, mine might be the 5BW-001. It was shipped as 5BMW-CTO. Only
    > afterwards, I was told by Tech support they were calling it a 5BW, of
    which
    > there are many different types. But the part numbers I listed are the
    part
    > numbers on the parts themselves, particularly the p/s.
    >
    >
    > "HH" <hahunt42@kgexpress.net> wrote in message
    > news:t7NDe.12$CS2.854@news.uswest.net...
    > > If It is the 5BWN21 you are referring to (Micro ATX board), it looks
    like
    > > a Standard ATX supply. Here are the specs:
    > >
    > > 5000t Power Supply
    > > U. S. Outside U. S.
    > > Input Specifications
    > > Voltage Switch Setting 115 V 230 V
    > > Nominal Line Voltage 115 VAC 230 VAC
    > > Range Input Line 90 to 132 VAC 180 to 264 VAC
    > > Frequency Range 47 to 63 Hz 47 to 63 Hz
    > > Power Factor 0.55 0.55
    > > Input Power 310 Watts 310 Watts
    > > Input Current 6 at 90 VAC 3 at 180 VAC
    > > Inrush Current 65 A at 115 VAC
    > > (cold start) 65 A at 230 VAC
    > > (cold start)
    > > Holdup Time 16 ms from zero crossing at 120 VAC 16 ms from zero
    > > crossing at 240 VAC
    > > Steady State (Max Power) 235 Watts 235 Watts
    > > General Specifications
    > > Full Output Rating To 122° F and 5,000 ft
    > > To 90° F and 10,000 ft (derate linearly) To 50° C and 1524 m
    > > To 32° C and 3048 m (derate linearly)
    > > Minimum Load 1.4 A on + 5.0 V output; 0.07 A on
    > > 12 V output 1.4 A on + 5.0 V output; 0.07 A on
    > > 12 V output
    > > Ambient Temperature Range
    > > Operating 50° to 122° F 10° to 50° C
    > > Storage -40° to 151° F -40° to 66° C
    > > Dielectric Voltage Withstand
    > > Input to Ground 1500 VAC/1 second
    > > Safety Standard UL 1950; CSA 22.2 950; TUV/VDE EN 60 950
    > > (VDE0805/11.91); EMKO-TSE (74-SEC) 207/94
    > > Input Transient Susceptibility
    > > Common and Differential Mode
    > > (superimposed on AC line) 2500 V, 1 us, damped sinusoid
    > > 600 V, 10 us pulse
    > > Differential Mode 20% step change in AC input voltage
    > >
    > >
    > > HH
    > >
    > >
    > > "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    > > news:pUMDe.2335$Qy1.1290@fe09.lga...
    > >> PS: Original PS part # 124848-001 (145 Watt? Not very much is it.)
    > >>
    > >> Thank you!
    > >>
    > >>
    > >> "Uncle Vinnie" <vinrin57@nospam.optonline.net> wrote in message
    > >> news:BRLDe.246$mf5.124@fe12.lga...
    > >>> Hi, all...
    > >>>
    > >>> Can anyone verify if the 5000T (5BW/ m'board #191767 which I believe
    is
    > >>> a Mitac 6513wu) has a standard ATX power supply?
    > >>>
    > >>>
    > >>> Thank you!
    > >>> --
    > >>> B'Regards,
    > >>>
    > >>> Vinnie
    > >>>
    > >>>
    > >>
    > >>
    > >
    > >
    >
    >
  8. Archived from groups: alt.sys.pc-clone.compaq (More info?)

    If the dimensions of the Powerman are the same, plug it in. Same ATX-type
    connector on the Compaq, right? AFAIK, Compaq never corrupted the ATX connector
    spec, like Dell did with its P2 and P3 systems. The older Dell systems are/were
    a major pain because the Dell motherboards required Dell power supplies, and
    there was no way to mix a Dell component with a standard one. This discouraged
    people from doing motherboard swaps, something Compaq did in even earlier times
    with wierd shapes to motherboards... Ben Myers

    On Thu, 21 Jul 2005 12:03:00 -0400, "Uncle Vinnie"
    <vinrin57@nospam.optonline.net> wrote:

    >I hear you Ben... amazing...but I'm not surprised.
    >
    >You, by chance, wouldn't know for sure if this is a standard ATX power
    >supply, would you?? I have a spare Powerman 230w I was going to put in....
    >
    >
    >
    >
    ><ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
    >news:42dfb95c.1271410@nntp.charter.net...
    >> Upgrading to a higher wattage power supply would be prudent. Compaq, HP,
    >> eMachines, IBM, Packard Bell (RIP), all of them shipped Pentium-class
    >> computers
    >> with 145w (or even less) power supplies. Their working assumptions for
    >> doing so
    >> are two-fold: cost savings and support ONLY for the configuration shipped,
    >> with
    >> little margin for error.
    >>
    >> This is yet another example of how much personal computers have become
    >> commodities. Sadly, unlike other commodities (apples, oranges,
    >> automobiles),
    >> the consumer has little or know opportunity to see what is under the hood
    >> of a
    >> computer before buying. So name brand manufacturers continue to build
    >> consumer-oriented boxed with cheap junk parts inside, showing great
    >> disrespect
    >> for their customers. Business-class computers are generally better made,
    >> because a large enterprise has the clout to park all the malfunctioning or
    >> poorly made computers on the loading dock and tell the manufacturer to
    >> take them
    >> all away... Ben Myers
    >>
    >> On Thu, 21 Jul 2005 09:43:39 -0400, "Uncle Vinnie"
    >> <vinrin57@nospam.optonline.net> wrote:
    >>
    >>>Thanks, HH.
    >>>
    >>>It appears to be a micro ATX, and the PS appear to be standard. The part
    >>>numbers I refer to are the ones on both the board and the PS.
    >>>
    >>>I cannot understand how the Power Supply can only be 145 watts. These
    >>>references are constant everywhere I look, and what I have from Compaq.
    >>>The
    >>>unit is running maxed out- 1.2 Tualatin (w/adapter), 512meg mem, floppy,
    >>>40g
    >>>HD, DVD, CD/RW, 512 mem (2x256's), modem, firewire, NIC, all 4 USB's
    >>>used...
    >>>
    >>>I was thinking of adding a 2nd HD, how can this all run on only 145
    >>>watts???
    >>>My daughter's Intel needs 300+, same config except that she also has a TV
    >>>board?
    >>>
    >>>Hence, why I was thinking of upgrading the PS to a 230 I have on hand...
    >>>
    >>>
    >> <SNIP>
    >
    >
Ask a new question

Read More

Compaq Power Supplies ATX Computers