I was playing with overclocking my system today.. and I was able to get it to run pretty stable at both of these settings: 230/230 1:1 OR 250/200 5:4... BUT.. I am not sure what the faster is? Should I just go for the higher CPU and lower Memory FSB.. or should I go for the highest of both.. in which my case it's 230fsb because I can't seem to get the memory to go any higher than 230fsb or else my computer will boot into windows and then immediately restart.
So what should I do? And what is a good way of benchmarking what way is faster?
Also, what voltages should I go with? Meaning for the vDIMM and vCore voltages..?
Thanks
NEW SYSTEM:
P4 2.8c (800fsb), Abit IS7, Kingston HyperX PC3500 (2 x 512mb), IBM Deskstar (60 gig @ 7200rpm)
OLDER SYSTEM:
P3 850mhz (100fsb), Asus CUV4X, 620mb Micron PC133, WD 40gig 7200rpm
So what should I do? And what is a good way of benchmarking what way is faster?
Also, what voltages should I go with? Meaning for the vDIMM and vCore voltages..?
Thanks
NEW SYSTEM:
P4 2.8c (800fsb), Abit IS7, Kingston HyperX PC3500 (2 x 512mb), IBM Deskstar (60 gig @ 7200rpm)
OLDER SYSTEM:
P3 850mhz (100fsb), Asus CUV4X, 620mb Micron PC133, WD 40gig 7200rpm
Facebook
Twitter
Instagram