Sign in with
Sign up | Sign in
Your question

My P4 2.4C

Tags:
  • CPUs
  • Overclocking
  • Dual Channel
Last response: in Overclocking
Share
July 9, 2003 10:12:15 AM

I wish to overclock my P4 2.4C CPU
I have a GA-8IK1100 Board with 2 512MB DDR400 runing in dual channel (not sure what type, but they have winboard chips on them)

What setting do you guys suggest i should use to get a stable overclock

Maximus

More about : question

July 9, 2003 3:58:31 PM

I'm planning on getting the same chip, but with an ASUS P4P800 mainboard.
At overclockers.com people have manged to get 3 gigs easy with just the stock fan. However if you want stability i suggest geting a new heatsink such as the Thermalright SLK-900.

You may also need to look at your case fans, if you overclock you'll be genertating a lot heat and a system fan that sucks air out might be handy.

Please tell me how you get on!!
July 12, 2003 1:19:44 AM

What about the ABIT boards? IC7? IS7? Arent those crazy overclockers?

Athlon XP 2500+ @ 2225MHz (12.5x178 @1.850v), Volcano 7 w/Smart Fan2, A7N8X Standard Rev. 1.06, Kingston HyperX PC3000 512MB @177MHz, Radeon 9700Pro, SB Live 5.1
July 16, 2003 1:21:33 AM

Well I can go up to 250x4 with stock voltage... my memory needs to be changed though

Intel P4 2.4C @ ???, ABIT IS7, Stock Intel HSF, Kingston HyperX PC3000 512MB @177MHz, Radeon 9700Pro, SB Live 5.1
!