Tom's Hardware > Forum > General Networking > Firewall > ZoneAlarm 5.0 problems

ZoneAlarm 5.0 problems

Forum General Networking : Firewall - ZoneAlarm 5.0 problems

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: comp.security.firewalls (More info?)

 

I posted earlier about my problems with 5.0...

I cannot use CHKDSK... when I check the option to reboot and do...
it does not run.... my PC shows the usual boot info... HD info etc
etc... then the windows startup screen THEN it says WINDOWS SHUTING
down... then it boots up... it's kind of double booting... note my
PC worked fine before I installed the 5.0 Suite... after the
problems I reinstalled an image of my HD... and my system worked
fine... so I reinstalled 5.0 Suite... the same problem occurred...
SO I reinstalled the image again... the PC was fine and then I
decided to tried 5.0 PRO this time... again I could not run
CHKDSK...

Does anyone have a fix for this... desides the obvious ;)

I noticed that folks at the ZoneLabs forums are having similar
problems...

http://forum.zonelabs.org/zonelabs [...] e.id=11711

http://forum.zonelabs.org/zonelabs [...] e.id=12067

--


=____________________________-
////// (____) RKBA _____|
(/////___________________(_____|
Giovanni Lentini (/ /( )/o/)_/)_/)_/)_/)
(/ 0 /_\__))
gio@rkba.net (/ /)
(/ /)
(/ 0 /)
(/____ /)
=======

Sponsored Links
Register or log in to remove.

Archived from groups: comp.security.firewalls (More info?)

 

On Thu, 27 May 2004 02:17:13 -0500, Bob Horvath wrote:
I also ran into a ZA problem. I didn't find any problems with 5.0
at first, until I checked my Comcast dl'd speed, and saw that it went
from 3400kbs to 1700 kbs. After much testing, it turned out to be ZA
5.0, Went back to 4.5 and speed is back up to 3400 kbs.


>I posted earlier about my problems with 5.0...
>
>I cannot use CHKDSK... when I check the option to reboot and do...
>it does not run.... my PC shows the usual boot info... HD info etc
>etc... then the windows startup screen THEN it says WINDOWS SHUTING
>down... then it boots up... it's kind of double booting... note my
>PC worked fine before I installed the 5.0 Suite... after the
>problems I reinstalled an image of my HD... and my system worked
>fine... so I reinstalled 5.0 Suite... the same problem occurred...
>SO I reinstalled the image again... the PC was fine and then I
>decided to tried 5.0 PRO this time... again I could not run
>CHKDSK...
>
>Does anyone have a fix for this... desides the obvious ;)
>
>I noticed that folks at the ZoneLabs forums are having similar
>problems...
>
>http://forum.zonelabs.org/zonelabs/board/message?board.id=inst&message.id=11711
>
>http://forum.zonelabs.org/zonelabs/board/message?board.id=cfg&message.id=12067
>
>--
>
>
> =____________________________-
> ////// (____) RKBA _____|
> (/////___________________(_____|
> Giovanni Lentini (/ /( )/o/)_/)_/)_/)_/)
> (/ 0 /_\__))
> gio@rkba.net (/ /)
> (/ /)
> (/ 0 /)
> (/____ /)
> =======

Reply to Anonymous
Tom's Hardware > Forum > General Networking > Firewall > ZoneAlarm 5.0 problems
Go to:

There are 515 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them