No POST

[Jerry72]

Installed new mobo M598-LMR-H.64 MB RAM. 9 Gg HD.CPU 266 MHZ.All LED lighs are on.Both fans(CPU and power supply) are on.Screen is blank.I have no POST ansno beep.


Jerry

 

[pIII_Man]

could be dead board...are you using the intigraded display adapter or a pci/isa card...are you sure everything else is in good shape?

3 386DX-25's...12 volts...glue some ln2 and a wicked amount of overclocking and you get a willamantee minus 36 pins, 33.75 million transistors and a couple hundred mhz...

 

[Jerry72]

I am using an integrated display adapter.

Jerry

Jerry

 

[pIII_Man]

have you used all of these parts in conjuction with one another...are you sure all of them work....do you have all of your jumpers correctly set? You are using a pentium w/ mmx? Make sure that you have it set to run a 3.3v not 2.5v vcore

3 386DX-25's...12 volts...glue some ln2 and a wicked amount of overclocking and you get a willamantee minus 36 pins, 33.75 million transistors and a couple hundred mhz...

 

[pIII_Man]

read your mobo manual...is there any way to set the vcore (via jumpers) for your cpu...

3 386DX-25's...12 volts...glue some ln2 and a wicked amount of overclocking and you get a willamantee minus 36 pins, 33.75 million transistors and a couple hundred mhz...