Overclocking my Gigabyte 8KNXP

Hi,
I just got my Gigabyte 8KNXP and was trying some preliminary overclocking and managed to get 1.6cpu voltage/.2 over dimm/and 265MHZ CPU = 3.18GHz, but when I turned the CPU Clock to 275. The computer wouldn't reboot to bios. Just sort of died. I didn't mess with the timings. Any advice would be welcome.

Setup:
Gigabyte 8KNXP
P4 2.4C
Kingston HyperX 3500 x 2 (256mb)
10k drive and a 7200 drive
5900 Gainward, etc...

Thanks,
Kris
4 answers Last reply
More about overclocking gigabyte 8knxp
  1. were u using 5:4 memory ratio?

    -Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Gold 2x256 3700EL memory @ 256mhz 2.5-3-3-7 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU
  2. How do I set 5:4 memory ratio? What do my timings get set to in memory?
  3. I set the CPU frequency to 275, DIMM over +2, CPU voltage to 1.6v. When I try to restart with new settings. It just sits there with a long beep doing nothing. I didn't touch the timings or anything.
  4. NM, i lost you, 5:4 is not the timing that the ratio of FSB:Memory Frequency, so when ur FSB is at 250mhz your memory is only at 200mhz. This way you eliminate the overclock-limiter(crappy memory).

    -Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Gold 2x256 3700EL memory @ 256mhz 2.5-3-3-7 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU
Ask a new question

Read More

CPUs Overclocking Gigabyte