survey: how far could you take barton 2500+?

with a biostard NCDV Pro, i was able to get

11x207 at 1.750 volts. Perfectly stable. PCmark 7283
11 answers Last reply
More about survey barton 2500
  1. This is the setup I sold:
    A7N8X Rev2.0
    512 PC2700 Kingston
    Swiftech MCX462+ with 80mm Tornado
    and other stuff
    1.825vcore 2634mhz 11.5x229 Stable in prime95 PCmark2002 8125

    -Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Gold 2x256 3700EL memory @ 256mhz 2.5-3-3-7 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU
  2. With aircool I highly recommend you not to try 1.825 vcore because that only worked for me in the winter time, in the summer, the diode gets to 55C and I don't like that.

    -Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Gold 2x256 3700EL memory @ 256mhz 2.5-3-3-7 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU
  3. I got mine to 2448mhz 12x204 prime stable in the end on 1.85 volts but it runs realllyy hot like this and needs 2 80mm 70cfm fans on my 900-u just to keep it below 55c!

    <A HREF="http://service.futuremark.com/compare?2k1=6996893" target="_new"> 3D-2001 </A>
    <A HREF="http://service.futuremark.com/compare?2k3=1284380" target="_new"> 3D-03 </A>
    <font color=red> 120% overclocker </font color=red> (cheapskate)
  4. 11.5x229

    memory sync ?
  5. Yup, my freak of nature PC2700.

    -Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Gold 2x256 3700EL memory @ 256mhz 2.5-3-3-7 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU
  6. the memory was rated 2-2-2-5 at 166 I ran it at 2.5-3-3-8 at 229mhz. 2.8vdimm of course.

    -Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Gold 2x256 3700EL memory @ 256mhz 2.5-3-3-7 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU
  7. just imagine if we can use DDR533 on that.!!


    <font color=red>If your nose <b>RUNS</b>, and feet <b>SMELL</b>.
    Then you must be born <b>UPSIDE DOWN</b>.</font color=red>
  8. 11*266 = 2950 Mhz. on ddr533

    <font color=red>If your nose <b>RUNS</b>, and feet <b>SMELL</b>.
    Then you must be born <b>UPSIDE DOWN</b>.</font color=red>
  9. sucks no nForce2 mobo can do that. They're all peak at 250mhz which most can't reach anyways.

    -Intel PIV 2.4C @ 3.84G -Asus P4P800 -OCZ Gold 2x256 3700EL memory @ 256mhz 2.5-3-3-7 -Sapphire 9800pro @ 490/780 -SB audigy -80G Maxtor Diamond Plus9 Ultra ATA-133 hdd -450 Enermax PSU
  10. impressive !
  11. currently stable at 11x200 3-3-3-11 going to push harder tomorrow, and see if ican titen up the ram timings a little


    "Going to war without France is like going hunting without an accordion."
    - Gen. (Ret) Norman Schwartzkopf
Ask a new question

Read More

CPUs Overclocking