mgame

Distinguished
Oct 6, 2003
30
0
18,530
Here's my prob. I have a ASUS A7V333 Mobo Rev 2.0 Bios version 1017. Current working cpu is a AMD Athalon 1700. Wanted to upgrade to a XP 2500. Originally thought new CPU was DOA so got RMA and replaced. Got replacement still won't work. Message received. "System fail cpu test in voice".

Anyone on this board or any other have the same mobo and have any luck getting the bloody thing to work. If so would you please tell me the correct settings for any jumpers I would have to set?!

Thought settings should be VID3,4 Set to pins 1 and 2.
Sysclock set to 166. Power regulator unlimited. Jumper free mode off.

Thanks, Matt Neufeld
 

Crashman

Polypheme
Former Staff
Your chipset doesn't properly support that bus speed, you might be able to unlock your multiplier and set it at 133MHz bus using a higher multiplier to get your speed back.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>