2.8c and p4c800 deluxe

[blairroyal]

I'm actually using the p4p800 deluxe right now. I don't know a lot about overclocking so I've just been overclocking it 20% so far and it's running at 3.37 ghz. When I try overclocking it 30% windows won't boot. Has anyone been able to beat this speed using the manual settings? If so please tell me what settings your using. I also have a p4c800 deluxe. Does the p4c800 deluxe have any advantages over the p4p800 deluxe? Oh yea I am using two 512 mb sticks of kingston hyperx 3200 ram. Any answers would be greatly appreciated.

 

[Crashman]

Thanks for telling us what memory you're using. Noone here knows how far your chip will go as each one is different. Try setting your memory speed to DDR333 (or DDR320, depending on how they list it), as it will overclock from that point as you overclock your CPU. If you reach 250MHz bus with the CPU, the RAM will then be clocked up to stock speed.

You will probably need to raise your CPU vCore up to 1.65v to get optimal results.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[scottchen]

Use Manual settings, set the FSB to 250 if you can, but you probably cannot with stock cool With stockcool you'll probably hit 230FSB max. So you could try that, set the Vcore to 1.65 and Dram freq to 320, then up the Vdimm to 2.85, tighten timings to 2-2-2-5, or whatever it is rated for. It should boot.

-Intel PIV 2.6C @ 3.51G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 270mhz 2.5-4-4-8 -Geforce2 MX400(i know i know) -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[twofruitz]

try put the overlclock mode on turbo, if u havent changed it it will be auto, its in the same section in the bios.

ive got the same board and i cant find the settings to change the ram timings? anyone know how to with the P4C800

---------
Intel PIV 2.4C @ 3.0G \
Asus P4C800 \
Corsair 2x512 3200LL memory \
Radeon 9600pro @ 500/350/6.75 \
SB Live 5.1 \
80G Seagate S-ATA150 \
430 Antec 1080AMG

 

[scottchen]

It's in chipset settings.

-Intel PIV 2.6C @ 3.51G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 270mhz 2.5-4-4-8 -Sapphire 9800np @ 420/740 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[blairroyal]

Alright I got my speed up to 351Ghz but it still feels like somethings missing. I get those error beeps when I boot. Heres a list of my settings and the available options for overclocking in the P4P800 Deluxe and the P4C800 Deluxe bios. The [ ]'s are my settings and the ( )'s are a list of all the possible settings. I am using a Pentium 2.8c processor and two sticks of 512 mb Kingston Hyper X 3200 www.valueram.com/datasheets/KHX3200_512.pdf.
-Jumperfree Configuration-

AI Overclcock Tuner [MANUAL](MANUAL,STANDARD,5%,10%,20%,30%)

CPU External Frequency (Mhz) [250] (100-400)

DRAM Frequency [AUTO] (AUTO,266Mhz,320Mhz,400Mhz)

AGP/PCI Frequency (Mhz) [AUTO] (AUTO, 66.66/33.33, 72.73/36.36, 80.00/40.00)

CPU VCore Voltage [1.6000v] (1.6000v, 1.5875v, 1.5750v, 1.5625v, 1.5500v, 1.5375v, 1.5250v, 1.5125v, 1.5000v, 1.4875v, 1.4750v)

CPU VCore Offset +0.1v [ENABLED] (ENABLED,DISABLED)

DDR Reference Voltage [2.85v] (2.85v, 2.75v, 2.65v, 2.55v, AUTO)

AGP VDDQ Voltage [1.50v] (1.80v, 1.70v, 1.60v, 1.50v)

Performance Mode [Turbo] (Auto,Standard,Turbo)

-Chipset Settings-

Configure DRAM Timing by SPD [ENABLED] (ENABLED,DISABLED)

If disabled you get the following options:
DRAM CAS# Latency (2.0 Clocks, 2.5 Clocks, 3.0 Clocks)
DRAM RAS# Precharge (4 Clocks, 3 Clocks, 2 Clocks)
DRAM RAS# to CAS# Delay (4 Clocks, 3 Clocks, 2 Clocks)
DRAM Precharge Delay (8 Clocks, 7 Clocks, 6 Clocks, 5 Clocks)
DRAM Burst Length (4 Clocks, 8 Clocks)

Performance Acceleration Mode [ENABLED] (ENABLED,DISABLED)

DRAM Idle Timer [AUTO] (Infinite,0T,8T,16T,64T,AUTO)

DRAM Refresh Rate [AUTO] (Auto, 15.6uSec, 7.8uSec, 64uSec, 64T)

Spread Spectrum [Enabled] (Enabled,Disabled)

 

[scottchen]

Dram frequency 320, disable performance acceleration mode first and try overclocking.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/780 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU