p4 3.06 or AMD 3200+?

[SkLn]

which of these is better according to benchmarks and tests? I just need a general answer like in general AMD 3200+ is better or worse...

 

[pIII_Man]

the 3.06 is faster the intel 3.0c is faster still and the intel 3.2c is the fastest.


If it isn't a P6 then it isn't a procesor
110% BX fanboy

 

[scottchen]

3200+ is worse than the 3.2C so it's probably worse than the 3.06.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/760 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[SkLn]

what about a AMD64 3200+ is this still worse than a p4 3.06 Ghz?

 

[scottchen]

AMD64 3200+ beats the 3.06B has little trouble beating the 3.2C because hyperthreading rules.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/760 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[twofruitz]

save yuor money and buy a 2.6c. good for OCing and its really really cheap. there is not too much of a performance difference betewen 2.6 and 3.06

<A HREF="http://service.futuremark.com/compare?2k1=6973142" target="_new">3dmark2001</A>

2.4C @ 3.0G
Asus P4C800
Corsair 2x512 3200
Sapphire 9600pro @ 500/700
80G Seagate S-ATA150

 

[scottchen]

Actually there is a difference, they're the same chip just multiplier's different.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/760 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[scottchen]

I actually did see difference with my 9800np, between default clock and the overclocked frequency. CPU in Halo showed off, from default 2.6 and OC 3.5 in massive battles, the overclocked system gives about 15-20 frames more when the average frame is at about 50.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/760 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[speeduk]

Halo is gpu dependent, a bit like 3dmark 03 is. So a 2ghz cpu will only be 1-2fps slower than a 3ghz cpu... Thats why my barton and 9700@9800pro speeds gets 55fps and a 3.2c + 9800pro gets the same....

My system spec: Fast PC<A HREF="http://service.futuremark.com/compare?2k1=7000747" target="_new"> 3D-2001 </A>
"It's not the spoon that bends, it's only yourself."

 

[Vapor]

I think he means 2.6 P4C vs 3.06 P4B, in which they should be equal performance wise (3.06's higher clock speed being counteracted by the 2.6's higher FSB speed). As to the original question, here is my ranking:

A-64 3200+
P4C 3.2
P4C 3.0
P4C 2.8
A-XP 3200+
P4B 3.06 / P4C 2.6
A-XP 3000+
P4C 2.4

Damn Rambus.

 

[HardWareBoss]

Did you find 9800NP?

 

[scottchen]

Not yet, still looking for 1, they're all goddamn Infineon 3.0ns.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/760 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[scottchen]

9800pro all uses 2.86ns Samsung. At least all in North America.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/760 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[HardWareBoss]

Cruical not sure on spelling has 9800Pros with 2.86ns. $336 or something on price. Didn't say it was Samsung.

 

[scottchen]

I guess Crucial used Crucial memory.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -Sapphire 9800np @ 432/760 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[HardWareBoss]

Most likely Micron. They own them don't they?