Sign in with
Sign up | Sign in
Your question

Q: Up Vcore so CPU will run at stock voltage?

Last response: in Overclocking
Share
December 6, 2003 1:28:55 PM

I have a P4 2.4C which is specified to run at 1.525V and set to do so at the BIOS. However, in windows Winbond Hardware Doctor shows that it's at 1.49 and when I run Prime95 it drops to 1.44 (when I stop running prime it goes back up to 1.49). System is completely stable at 250 FSB despite low V but I can't get it to boot at 260 FSB even when V is set at the BIOS to 1.675. Should I set the BIOS to pump the CPU with more voltage to get it to be at 1.52 in windows under load?
P.S: There should be an OC FAQ with short Q&A, many posts like this are just questions that might repeat themselves.

Is 2^33634943-1 prime? (more than 10Mil digits @55.5%) I will know in 2 weeks when <A HREF="http://www.mersenne.org" target="_new">Prime95</A> finishes checking!
December 6, 2003 2:37:01 PM

I will edit the guide this afternoon, gotta go to work now, the only thing I think you should do is to boost vcore up to 1.7, and vdimm up to 2.8 be back in about 8 hours to edit that guide.

-Intel PIV 2.6C @ 3.575G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 275mhz 3-4-4-8 -XFX 5900 128meg 450/900 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU
!