Is this good for my 2.6c?

[Jarablue]

I have my 2.6c @ 3.250 on the stock cooler. I have Corairs XMS 4000 250mhz rated ram. I am running 1:1 with a fsb of 1000. How and is it possible to get more out of this rig? The highest I could get is 252 fsb. I know my ram is rated for 250 but this is running in dual channel. What do you guys think? Can I get higher? What should I do?


In the immortal word's of Bob Marley, "Let's get together and feel alllright..."

 

[scottchen]

What's your mobo, and what's your vcore at?

-Intel PIV 2.6C @ 3.276G -Asus P4P800 -OCZ Copper 2x256 4000EL memory @ 252mhz 2.5-3-4-6 -XFX 5900 128meg 450/900 -SB audigy -120G Maxtor Diamond Plus9 S-ATA150 hdd -450 Enermax PSU

 

[Crashman]

I think you're doing perfectly well, and shouldn't really expect too much more out of what you have!

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[Jarablue]

P4P800 Deluxe and I am runnin at 1.575 vcore. I don't think I should push this any higher. I am totally happy with my setup. But still would like to hear from you guys. I get 6294 with 3dmark03. Thannks guys.


In the immortal word's of Bob Marley, "Let's get together and feel alllright..."

 

[ytoledano]

You say your RAM limits you, so up VDIMM a bit, than overclock a bit more, I think that if you reach the spot where the CPU won't let you go any further you can increase Vcore to 1.6, maybe 1.625, but you may not get there and have your RAM stop you before that.

I know what everyone's been wondering - 2^33634943-1 IS NOT PRIME. Now, wasn't that worth running <A HREF="http://www.mersenne.com" target="_new">Prime95</A> for a month to know?