would a better water block help?

Ris3n_Da3mon

Distinguished
Sep 1, 2003
186
0
18,680
So yesterday I spent a couple hours rearranging my cables so I could get better airflow, and I added a 120mm fan(intake) by the fan blowing out through my radiator. Currently my cpu is 32C idle, and after 20 or so minutes of halo gets up to 34C. I currently have a rather crappy copper waterblock my friend made. So do you think that a better water block would decrease my temps all that much?

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001
 

Ris3n_Da3mon

Distinguished
Sep 1, 2003
186
0
18,680
Don't everyone respond at once!!

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001
 

Ris3n_Da3mon

Distinguished
Sep 1, 2003
186
0
18,680
Really though, some type of input would be nice, I really don't want to spend 30-40 bucks to not have it do anyhting!

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001
 

Ris3n_Da3mon

Distinguished
Sep 1, 2003
186
0
18,680
well nevermind I got my answer elsewhere since you guys were SOOOOOOOO helpful in answering my question.

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001
 

HammerBot

Distinguished
Jun 27, 2002
1,342
0
19,290
What the hell is your problem? Those temps are extremely satisfactory. Why do you need them lower? Your comp is not going to run any faster just by cooling the CPU further.

<i><b>Engineering is the fine art of making what you want from things you can get</b></i>
 

Ris3n_Da3mon

Distinguished
Sep 1, 2003
186
0
18,680
I'm curious. What was the answer & where did you get it from?
Well I got help from a friend that goes to a monthly local lan party.

Basically in theory I could lower my temp, but I'd also have to get a more powerful pump. and at most it would lower it by like 2-3 degrees at most.

What the hell is your problem? Those temps are extremely satisfactory. Why do you need them lower? Your comp is not going to run any faster just by cooling the CPU further.
I want it to be as cold as I can get it. Just a completely pointless hobby. :D and besides when I finally get enough money to buy a nforce2 mobo I can overclock :D



01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001
 

Ris3n_Da3mon

Distinguished
Sep 1, 2003
186
0
18,680
I can't get it to be stable any higher then 175. Damn kt333 not allowing me to lock the PCI bus!!! GRRR Plus I have shitty ram, 512 kingston valueram pc 2700. :\ So at this point over clocking is a bit pointless as it gives me MAYBE a 400 point increase in aquamark.

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001