CPU : XP2500 Barton (Week 33 0333)
Cooling: Stock (cpu Temp about 47/48C)
Memory : Corsair PC3200 CL2 (single 512)
Mobo : Abit NF7-S 2.0
Mem Timings: By SPD (2.5 3 3 8)
Vcore : 1.75 (upped from 1.65)
Other Voltages: (at default)
Multiplier: 11
Last Seemingly stable FSB: 196. Cannot get this to 200.
Tried jumping over, no luck.
It doesn't make sense to me to add any voltage to the memory but might this help?
Is it still adviseable/sensible to up the voltage to 1.8? 1.775 is not stable at 200.
I realize I may be degrading my CPU.
What is the significance of 1.8V limit in the sticky?
I have noticed 1.8V as used/max in other places.
Dropping Multiplier to 10.5 lets me get to about 205.
Any advice on the OC would be appreciated.
Thanks in advance for your advice.
The loving are the daring!<P ID="edit"><FONT SIZE=-1><EM>Edited by Flinx on 01/31/04 09:47 PM.</EM></FONT></P>
Cooling: Stock (cpu Temp about 47/48C)
Memory : Corsair PC3200 CL2 (single 512)
Mobo : Abit NF7-S 2.0
Mem Timings: By SPD (2.5 3 3 8)
Vcore : 1.75 (upped from 1.65)
Other Voltages: (at default)
Multiplier: 11
Last Seemingly stable FSB: 196. Cannot get this to 200.
Tried jumping over, no luck.
It doesn't make sense to me to add any voltage to the memory but might this help?
Is it still adviseable/sensible to up the voltage to 1.8? 1.775 is not stable at 200.
I realize I may be degrading my CPU.
What is the significance of 1.8V limit in the sticky?
I have noticed 1.8V as used/max in other places.
Dropping Multiplier to 10.5 lets me get to about 205.
Any advice on the OC would be appreciated.
Thanks in advance for your advice.
The loving are the daring!<P ID="edit"><FONT SIZE=-1><EM>Edited by Flinx on 01/31/04 09:47 PM.</EM></FONT></P>