Hi, flashed the BIOS on my FX5900 to turn it into an FX5950. Seems to work OK and the card dropped a full 10 degrees after the flash according to Coolbits. Only problem was that the card was artifacting badly in 3D - then (in desperation) I upped the AGP voltage (from 1.5 to 1.6). The problem was still there but to a lesser degree. I've ended up winding the voltage all the way up to 1.8 and now everythings running sweet - temps havn't risen and no artifacts. Anyone know of a downside to upping the voltage to the AGP slot?