Sign in with
Sign up | Sign in
Your question

Celeron 1gig tually overclock

Last response: in Overclocking
Share
May 4, 2004 6:50:10 PM

This board has no fsb selection "auto pin config' d815eea2
Does someone around still have a schmatic pin out for the Celeron 1000 tully Overvolt mod and the pin out for the 133fsb ? wanting to get 1330 mhz .@ 133fsb Please reply gota get the rig back to it's owner . Waiting with telephone wire and thermalpaste in hand ....Thanks
May 5, 2004 2:31:42 AM

Not off the top of my head. Just read the spec sheets at support.intel.com

*Dual PIII-800 @900 i440BX and Tualeron 1.2 @1.7 i815*
a b à CPUs
a b K Overclocking
May 5, 2004 2:45:39 AM

I sent you the information you need. Do the pin mods, I'd try 1.65v and 133MHz FSB.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>
May 6, 2004 4:48:51 AM

DOE ! Pulled a homer ! I built the can 2 years ago then built a 1.1 celly-tually runing 1463mhz 1.75v'ish .I opened up the older celly took off the hsf and discovered a .18 celly !!!! ug I forgot i built a BUDGET box lol .. Sorry for bugin you crash But I now have printed out the schmatic for later reference . Thanks for a speedy reply ...Happy O.C. ps upgraded my board p4s533 to p4c800delux now 1.6A @ 2.6 mhz whoot cnat wait for a 2.6C mmmmmmm
!