safe vcore for p4e

[mopeygoth]

what is <subj>?

So far it has been running 3.6ghz (240*15) with a 1.4375vCore with no crashes

Corrected "minor" typo



Abit IS7 - Prescott 3GHZ@3.6ghz - i865PE - 1024mb dual ddr400 - Geforce 256 DDR - 600W dualfan(front/rear) PowerTek Psu - maxtor 4K080H4 & 6Y120P0 - samsung sm-352b<P ID="edit"><FONT SIZE=-1><EM>Edited by mopeygoth on 08/20/04 02:40 AM.</EM></FONT></P>

 

[Cybercraig]

Horsefeathers! No CPU can take over 4 volts.

Abit IS7 - 2.8C @ 3.4ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

 

[PukePile]

Anything under 1.7 should be moderatly safe as long as your temps are ok.


<A HREF="http://arc.aquamark3.com/arc/arc_view.php?run=682299587" target="_new">40k in aquamark 3
</A>
P4b2.4@2.8||1024mb DDR@392mhz||9800pro@420/740||Viewsonic UltraBrite 19"||Panisonic DVD-RW

 

[mopeygoth]

thnx dude, that implies to safe limits of the PSDS (prescott sudden death syndrome) as well?

Any other limit I should consider for increased lifetime?

Abit IS7 - Prescott 3GHZ@3.6ghz - i865PE - 1024mb dual ddr400 - Geforce 2 MX400 64MB - 600W dualfan(front/rear) PowerTek Psu - maxtor 4K080H4 & 6Y120P0 - samsung sm-352b

 

[Cybercraig]

I know, I was just teasing you. I don't know about the Prescotts, but raising the Vcore from 1.525v to 1.65v on this Northwood only raised my idle temps 4C. I'm back down at 1.58v now and in a real sweet spot.

Abit IS7 - 2.8C @ 3.4ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot

 

[mopeygoth]

np. that's nice dude. my vcore defaults at 1.385, the retailbox states: max 1.4v; so i guess we are both pretty well off.

Abit IS7 - Prescott 3GHZ@3.6ghz - i865PE - 1024mb dual ddr400 - Geforce 2 MX400 64MB - 600W dualfan(front/rear) PowerTek Psu - maxtor 4K080H4 & 6Y120P0 - samsung sm-352b

 

[PukePile]

Ya im not sure about prescotts snice they are .09 they use less voltage id say 1.7 if you got the balls 1.6 if you dont


<A HREF="http://arc.aquamark3.com/arc/arc_view.php?run=682299587" target="_new">40k in aquamark 3
</A>
P4b2.4@2.8||1024mb DDR@392mhz||9800pro@420/740||Viewsonic UltraBrite 19"||Panisonic DVD-RW

 

[Crashman]

I wouldn't go over 1.550v with the Scotty.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[mopeygoth]

tnx all

Abit IS7 - Prescott 3GHZ@3.6ghz - i865PE - 1024mb dual ddr400 - Geforce 2 MX400 64MB - 600W dualfan(front/rear) PowerTek Psu - maxtor 4K080H4 & 6Y120P0 - samsung sm-352b