Tom's Hardware > Forum > Overclocking > CPUs > Hi all

Hi all

Forum Overclocking : CPUs - Hi all

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
emolok   01-05-2005 at 08:16:42 AM

This is my first time to come to this forum.
Any comment to my computer??
And I want to ask what nForce2 mainbroad can run ~250FSB
My mainbroad always hang when a run 250FSB

AXP2500+@230*10
Corsair XMS-PC3500C2 Rev1.1 @CL2-2-2-10
Abit AN7
Grandmars 9500 Hardmod. 9700pro

Add a reply
Sponsored Links
Register or log in to remove.
emolok   01-05-2005 at 09:46:48 AM
- 0 +

But I am afraid that nForce2 NorthBridge can't run 250 stablely.......

AXP2500+@230*10
Corsair XMS-PC3500C2 Rev1.1 @CL2-2-2-10
Abit AN7
Grandmars 9500 Hardmod. 9700pro

Reply to emolok
emolok   01-05-2005 at 10:48:43 AM
- 0 +

But I try to +v. like this

CPU v. 1.9v
DIMM v. 3.2v
NB v. 1.75v

250*9.5
ramCL 2.5-3-3-8
but sometime can go in window, can't finish 1M superpi

AXP2500+@230*10
Corsair XMS-PC3500C2 Rev1.1 @CL2-2-2-10
Abit AN7
Grandmars 9500 Hardmod. 9700pro

Reply to emolok
emolok   01-06-2005 at 06:03:09 AM
- 0 +

If I am not for Benchmark, I will use 230*10(very stable)
If I am doing Benchmark, I will use 245*10(not very stable and need to add voltage.)

AXP2500+@230*10
Corsair XMS-PC3500C2 Rev1.1 @CL2-2-2-10
Abit AN7
Grandmars 9500 Hardmod. 9700pro

Reply to emolok
emolok   01-06-2005 at 06:17:52 AM
- 0 +

Using Alpha 8045 Heatsink and a Delta 8CM fan for cooling.
Vcore is 1.85v.

AXP2500+@230*10
Corsair XMS-PC3500C2 Rev1.1 @CL2-2-2-10
Abit AN7
Grandmars 9500 Hardmod. 9700pro

Reply to emolok
funkdog   01-06-2005 at 06:37:48 AM
- 0 +

I got my old PAL-6045 kicking around here somewhere.

<b>"These are my thoughts, your mileage may vary."

Reply to funkdog
emolok   01-06-2005 at 06:39:30 AM
- 0 +

just a normal delta fan (4000 rpm)

My CPU is 48 degree while 1.9v. is adding.
Do you think it can use 2.00v with air cooling?
And I want to ask if all the barton CPU can use 2.00v?

AXP2500+@230*10
Corsair XMS-PC3500C2 Rev1.1 @CL2-2-2-10
Abit AN7
Grandmars 9500 Hardmod. 9700pro

Reply to emolok
emolok   01-06-2005 at 06:40:48 AM
- 0 +

I have a PAL-6035 only.
It is good for s370 P III and some old duron cpu

AXP2500+@230*10
Corsair XMS-PC3500C2 Rev1.1 @CL2-2-2-10
Abit AN7
Grandmars 9500 Hardmod. 9700pro

Reply to emolok
Joe   01-27-2005 at 01:07:05 PM
- 0 +

Remember those old P55C motherboards that had the snap on voltage regulators allowing for split Vio and Vcore voltages. How nice would it be if they implemented the same technology today to allow us to effectively "upgrade" our voltage regulators to high performance models. No more volt-mods neccessary. Can you imagine how gorgeous that would be? Just a thought......

ABIT NF7-S v2.0
Athlon Mobile 2600+ 45-watt (IQYHA) (11x227) 1.825v
GeForce 5900 (BIOS modded to 5950 Ultra)
Kingston HyperX PC4000 1x512 (2.5-4-3-7)

Reply to Joe
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > CPUs > Hi all
Go to:

There are 1242 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.160 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
How do I win badges?