OCing a BBA 9700pro

[Ris3n_Da3mon]

Well, I've had the thing for more then a year and a half and it's FINALLY starting to lag up in games. So I went a got myself one of these babies: <A HREF="http://www.zalmanusa.com/usa/product/view.asp?idx=138&code=013" target="_new">ZM80D-HP</A>
I have a 60mm on it, and a 80mm on the side of my case giving it plenty of fresh air. But the thing is, I CAN'T get the sucker past 360/340. I know I've seen people get these in the 400's. So what can I do to get a higher OC? Oh yeah, and I'm using Rage3d for OCing. I've also tried using ATI tool, but same results.

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001

 

[Ris3n_Da3mon]

400 on the core, I know the RAM won't go that high.

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001

 

[Ris3n_Da3mon]

I did that to my card once, though I didn't take off the edging. I get a much higher OC with the Zalman then I ever did with the AMD heatsink. I think there's an old post on here some where when I did it....

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001

 

[Ris3n_Da3mon]

Know a good site that gives a thorough walkthrough of how to do the volt mod to a 9700 pro?

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001

 

[Ris3n_Da3mon]

And what's the max voltage that the 9700 can handle?

01001001 00100000 01001100 01001111 01010110 01000101 00100000 01110011 01110000 01100101 01100001 01110010 01101101 01101001 01101110 01110100 00100001