honsbeek

Distinguished
Jan 19, 2005
33
0
18,530
HEllo ,

I'm trying to overclock my ASUS Motherboard (p4p800SE)
I have a Pentium prescott 2.8 and 256 x 2 PC 3200 DDRAM in dual slots.
I have tried overclocking in the bios , automatically with the 5 % , 10% 20 % options...
Is this automatical setting any good???

then i tried manually ...

I set up like this and the system blacked out and had to reset the bios each time...

AI Overclock Tuner Manual
CPU External Frequency 200 Mhz ( I'm not sure til what number i can push this safely) it goes till 400 Mhz
DRAM Frequency 66.66/33.33

CPU Vcore Voltage [Auto]
DDR Referance Voltage [Auto]
AGP VDDQ Voltage [1.50v]

Performance Mode [Auto] (there's also turbo)

then I messed around in the Dram Timing setup as followed.

But at this point it got really complicated for me...


Please can you recommend a setting for me ???

Again my board is the ASUS p4p800SE with a Prescott P4 2.8 GHz (800) 1mb Lcache plus a Radeon 7400 64MB
and two times 256MB Samsung PC 3200 DDRram in dual slots...

Please if anyone could help me out
thank you
Ralph in Seoul
 

lb19984

Distinguished
Nov 18, 2003
671
0
18,980
Check out the P4 overclockoing guide
I wouldnt go above 228 which is 3200 without some aftermarket cooling



<A HREF="http://www.freewebs.com/lb19984/" target="_new">My Rig</A>