VIDEO CARD FOR A G400

Archived from groups: alt.sys.pc-clone.gateway2000 (More info?)

Try a GeForceTI card, I heard those were nice and they're made for 2x slots.
I had a GeForce4 64mb running in a PII 333 Gateway no trouble. What's your
PSU? If it's a low one you might have to upgrade it when you get a higher
end card.


"Chopperdad" <scotty@bellsouth.net> wrote in message
news kfzc.24782$FC3.8772@bignews1.bellsouth.net...
> I was wondering what currently is the best video card for a G-400 computer
> running Windows 98SE. It is a Pentium II 400 MHz with still the original
> BIOS. Currently it has a Hercules GeForce2 MX with 32 Mb and the AGP slot
> is a 2X.
>
> I know a lot of the cards out there require a PIII 600 MHz or better to
run
> properly.
>
> Thanks!
>
>

Archived from groups: alt.sys.pc-clone.gateway2000 (More info?)

Go carefully here, especially if buying a new card. Some AGP cards work only at
4x and 8x, not 2x. Others operate in an AGP slot supplying 1.5v, not the 3.3v
AGP in your system. Some AGP cards work at either voltage... Ben Myers

On Mon, 14 Jun 2004 06:50:39 -0400, "Chopperdad" <scotty@bellsouth.net> wrote:

>I was wondering what currently is the best video card for a G-400 computer
>running Windows 98SE. It is a Pentium II 400 MHz with still the original
>BIOS. Currently it has a Hercules GeForce2 MX with 32 Mb and the AGP slot
>is a 2X.
>
>I know a lot of the cards out there require a PIII 600 MHz or better to run
>properly.
>
>Thanks!
>
>

Archived from groups: alt.sys.pc-clone.gateway2000 (More info?)

What about a ATI Radeon 8500 128Mb DDR AGP Video Card 2X/4X? That's the
best I've seen so far.

<ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
news:40ceed6b.1495958@news.charter.net...
> Go carefully here, especially if buying a new card. Some AGP cards work
only at
> 4x and 8x, not 2x. Others operate in an AGP slot supplying 1.5v, not the
3.3v
> AGP in your system. Some AGP cards work at either voltage... Ben Myers
>
> On Mon, 14 Jun 2004 06:50:39 -0400, "Chopperdad" <scotty@bellsouth.net>
wrote:
>
> >I was wondering what currently is the best video card for a G-400
computer
> >running Windows 98SE. It is a Pentium II 400 MHz with still the original
> >BIOS. Currently it has a Hercules GeForce2 MX with 32 Mb and the AGP
slot
> >is a 2X.
> >
> >I know a lot of the cards out there require a PIII 600 MHz or better to
run
> >properly.
> >
> >Thanks!

Archived from groups: alt.sys.pc-clone.gateway2000 (More info?)

Not sure. Check with ATI tech support before buying. Odds are fairly good that
it works at 3.3v, but I like to bet on sure things... Ben Myers

On Wed, 16 Jun 2004 22:45:12 -0400, "Chopperdad" <scotty@bellsouth.net> wrote:

>What about a ATI Radeon 8500 128Mb DDR AGP Video Card 2X/4X? That's the
>best I've seen so far.
>
><ben_myers_spam_me_not @ charter.net (Ben Myers)> wrote in message
>news:40ceed6b.1495958@news.charter.net...
>> Go carefully here, especially if buying a new card. Some AGP cards work
>only at
>> 4x and 8x, not 2x. Others operate in an AGP slot supplying 1.5v, not the
>3.3v
>> AGP in your system. Some AGP cards work at either voltage... Ben Myers
>>
>> On Mon, 14 Jun 2004 06:50:39 -0400, "Chopperdad" <scotty@bellsouth.net>
>wrote:
>>
>> >I was wondering what currently is the best video card for a G-400
>computer
>> >running Windows 98SE. It is a Pentium II 400 MHz with still the original
>> >BIOS. Currently it has a Hercules GeForce2 MX with 32 Mb and the AGP
>slot
>> >is a 2X.
>> >
>> >I know a lot of the cards out there require a PIII 600 MHz or better to
>run
>> >properly.
>> >
>> >Thanks!
>
>

Archived from groups: alt.sys.pc-clone.gateway2000 (More info?)

FWIW my Matrox G550 card has worked fine in the AGP slot in my G6 400 for a
year and a half now. And you can use two monitors with it.
"Chopperdad" <scotty@bellsouth.net> wrote in message
news kfzc.24782$FC3.8772@bignews1.bellsouth.net...
> I was wondering what currently is the best video card for a G-400 computer
> running Windows 98SE. It is a Pentium II 400 MHz with still the original
> BIOS. Currently it has a Hercules GeForce2 MX with 32 Mb and the AGP slot
> is a 2X.
>
> I know a lot of the cards out there require a PIII 600 MHz or better to
run
> properly.
>
> Thanks!
>
>