funkdog

Distinguished
Apr 4, 2001
703
0
18,980
Anyone gotten a better o/c by cooling the Bridge on their Nforce3's and 4's??

Has the day of cooling the northbridge better gone?

I pulled my sink off and applied AS3 instead of the Epox gunk, didn't improve o/c any.

<b>"These are my thoughts, your mileage may vary."
 

Codesmith

Distinguished
Jul 6, 2003
1,375
0
19,280
Its installed, but all it will let me do is set the alarm.

I can up the FSB by up to 11%, change the CPU voltage, but not the fan speed.

At 7200+ rpm the fan has an anyoning whine that can be hear over other fans/drives. Its the loadest one in my system. The six hard drives drown it out a bit.
 

Codesmith

Distinguished
Jul 6, 2003
1,375
0
19,280
I have the MSI Neo 4 Plantinum (Nforce 4 chipset). All Core Center will let me do is change the alarm settings, CPU fan speed, PCI-e speed, CPU voltage, Memory Voltage.

It Displays V Core 3.3, 5, and 12v and CPU, System temp, NB temp, CPU fan RPM, and NB fan RMP.

NB temp is always NA.

Is something wrong with my MB, or does core center just not have these features on my board?
 

Codesmith

Distinguished
Jul 6, 2003
1,375
0
19,280
Yes, that is how I change the CPU fan speed.

But I see no control for the NorthBridge!

Are you saying that there is supposed to a control for both the CPU and NB Fans, because if there is a NB fan control I am not seeing it.